cover - what is wrong with the microwave. Nothing is wrong with the microwave, the plastic cover was either not microwave suitable or a splash of grease/oil/food was stuck to the plastic and melted it
...melted the plastic spider as well. 2.the microwave oven was turned on with nothing. or almost nothing, in it: the glass turntable is what is known as "a matching load". That means it is there as a ...
Melted plastic turntable teeth We melted the plastic part that comes out of the bottom of the microwave to make the turntable turn. Is there a way to replace the piece? I'd hate to replace the whole ...
Question about In Microwave Ovens
...plastic container that melted and leaked throuogh bottom of microwave? this happened to me so when i opened door itall went dead. i found a diode had blown as it was connected to the metal casing and ...
...plastic frame around the top of the door is wrinkled, as if it has melted. I have photos of this if you need them. Please let me know 1. Is it safe to use (it works OK) or will radiation leak? 2. Why ...
...melted over the spot where the plastic ring burned. The glass tray had a spot about 2" in diameter that was glowing red. What happened here? Sounds like some metal is involved somehow. If the unit ...
Question about Panasonic Microwave Ovens
...melting on inside - only 2.5 years old. Has anyone else had this fault or just please check where the glass meets the plastic on inside door. I've only had mine 4 months and the door seal has
Question about Bosch Microwave Ovens
Signs of burning on inside of plastic door surround . I have sings of burning of the plastic inner door surround at the bottom left hand corner - hinge side . The plastic is distorted and has early ...
Question about GE Microwave Ovens
Burn mark on plastic film of microwave door, can I patch with peel and stick plastic? GE MODEL JVM3670SK06 I would not risk it. Your better finding out why there is a burn mark there. The plastic film
...melted The plastic cover over the vent situated inside the over compartment has melted through/burnt. Why would that be? The temperature reached a high enough value to make the plastic melt .The ...
119 questions posted
Usually answered in minutes!
86 Questions
61 Questions
33 Questions
27 Questions
29 Questions
