it. It can be bypassed momentarily and if the picture comes back then the t-con is the problem for sure. You really ought to take it to a shop as this is not something that is easily diagnosed at home
Question about Proview Televison & Video
...fuse. :) ....and that worked beautifully. Check the picture attached for what I did. If the sound is working, I doubt the power supply is at fault. You can check with a simple voltmeter - red is ...
Question about Televison & Video
picture everything else works fine trying to isolate which card is the problem. no screen at all For the TV repair, if you're lucky it's just a 20 cent fuse or two on the power supply board. If you're
...bypassed it with a jumper wire from connector VIN to the hot side of C13. One image shows the suspect part and the jumper in place. The other shows the TCON board placement top-center (under its RF ...
...bypassed it with a jumper wire from connector VIN to the hot side of C13. One image shows the suspect part and the jumper in place. The other shows the TCON board placement top-center (under its RF ...
picture, no sounds , nothing.......anythnig simple ????? [email protected] I bypassed the fuse on my TV with the same problem and realized a new fuse for under a buck would fix it. TV works fine.
...picture or sound. If I unplug it, then plug it back in, the lights light up on the bottom and when I press the power button, the buttons iluminate, but do not function. From what I've read, it seems ...
Question about Polaroid Televison & Video
...which board has smoked, I will suspect the power supply module. This is poorly designed TV! See the pictures and the prices of the boards here: ...
...bypassed protect mode and now I only get sound out of the video out modes. LED is flashing 12 times indicating a D12V problem. Anyone know where I can purchase these circuit boards or even have them ...
458 questions posted
Usually answered in minutes!
335 Questions
292 Questions
276 Questions
218 Questions
173 Questions