Xerox Phaser 6250 Laser Printer "bin full" Questions

...bin full error can occur if the waste bin was not removed from the machine for over 10 seconds when it was emptied. Please remove the waste bin and wait for a full 10 to 20 seconds before replacing ...

...bin full however there is no paper there. The bin full sensor is probably defective or has paper dust in it blocking the light beam. Try blowing out the sensor with canned air. If that doesn't solve ...

...bin it hits a paper exit sensor. As the paper piles up it will eventually hit the paper full actuator and then energize the paper full sensor. Check to see that the paper full actuator is intact and ...

full and there aren't any error messages. I did a combination of the things listed in the below link. http://office.support.xerox.com/SRVS/CGI-BIN/WEBCGI.cgi/,/?St=180,E=0000000000023462887,K=8165,Sxi

...full. Hi, For this machine I don't think there is a reset, but it is tempormental about the light that shines throught the back of waste cartridge. Copy and paste this link directly into your address ...

...need to clean the LED printheads. Full instructions on how to do this are located at:

...BIN/WEBCGI.EXE?St=36,E=0000000002092637520,K=9394,Sxi=5,Case=obj(3085) open and close cover after replace chip cartrige This happened to us today --- really frustrating! We ended up changing the ...

full sensor. This is what Xerox has to say about the NVRAM failure: On the front panel, press the key labeled i to view information about the error. Record the error code number. Turn off the printer.

...full but a rocked it from side to side to settle the contents (be carefull as they can come out) and when refitted the light stayed off when powered up. I'm not sure if this waste cartridge needs to ...

...full page (100% fill) of the color not printing correctly, or download and use one of the resource files provided in the table below. For example, if cyan ink is actually printing black, create a ...