...change, same error alert. What to do next??? Thanks fo any ideas... Hi, Try the following steps and check if it resolves the above error. 1. Disconnect the Universal Serial Bus (USB) cable from the ...
Question about HP PhotoSmart Office Equipment & Supplies
...pull tab to gently remove the protective plastic tape from the cartridge. CAUTION: Do not touch the copper-colored contacts or ink nozzles. Touching these parts can result in clogs, ink failure, and ...
...5. Reconnect the power cord. If the product does not automatically turn on, press the Power button. 6. Open the cover and reinsert the print cartridges. 7. Close the cover. If prompted, print a ...
...on your printer. Or you will get the waste pad full error. Hope this helps. vulmec.wordpress.com Try pull power cord out wait 2 minutes plug in try again my general tool ip1880 not work in my ...
...change laser printhead Laser printers do not use a printhead.When the toner runs out you need to get a new toner cartridge which includes the print drum.You lift up the cover to reveal the toner ...
Question about HP PhotoSmart Office Equipment & Supplies
change cartridges...when it moves, pull the plug. The idea is to stop it where you can remove the cartridges. 3) If you are succesfull with steps 1 & 2, close the lid and plug the power cable back
change ink cartridges. Open this access panel. If the carriage that holds the ink cartridges moves, then you forgot to unplug the printer, go back and do that now. Look for paper that may be jammed in
change ink cartridges. Open this access panel. If the carriage that holds the ink cartridges moves, then you forgot to unplug the printer, go back and do that now. Look for paper that may be jammed in
change ink cartridges. Open this access panel. If the carriage that holds the ink cartridges moves, then you forgot to unplug the printer, go back and do that now. Look for paper that may be jammed in
Question about HP PhotoSmart Office Equipment & Supplies
...pull away the glued points on the sides.) 6. Gently, move head up and down to slosh solvent around it the best as you can. Use a table spoon or syringe to pour solvent over all orifices in the print ...
301 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions