...does not work you will need to take it in. May be a bad sensor or unpulged but that is rare. Also not all bernina feed have this foot sensor, if this is the case it will not read it hope this ...
Question about Sewing Machines
...foot. Sometimes the sensor has a smudge or lint on it that is disrupting the sensor. You might try cleaning it. If it doesn't occur with any other foot, then it is probably an issue with the foot ...
foot with the sensor lenses on it ... your machine has the optical sensor for the automatic buttonhole foot and I'm wondering if you're getting it confused by using a foot that is not designed
Question about Sewing Machines
...sensor (also called the foot controller) is not, there are a few things you can try: Check the connection: Make sure the foot controller is properly plugged into the machine. If it is loose or not ...
...sensor one-step buttonhole foot husqvarna sewing machine won't sew because it says remove sensor one-step buttonhole foot and that foot is not on Sounds like the sensor has gone bag or something is ...
Question about PfaFF Sewing Machines
...buttonhole foot connected. Please remove foot" while I am sewing with a regular foot and a regular straight stitch. It sounds like the sensor connection where you plug in the buttonhole foot is
Question about Sewing Machines
...foot that has a sensor on it. Make sure you are using a presser foot made for your machine. Yes what R.A Ellis said dear. More than likely that will slove yr problem. You must use all the same ...
Question about PfaFF Sewing Machines
...foot hight. The sensor is broken. Where can I buy a sensor for presser foot height? The only place you will get a part like that is direct from Pfaff or an authorized repair centre. Sewing Machines - ...
Question about Sewing Machines
...cable and connection to ensure it's securely plugged in. If the problem persists, consider cleaning the foot pedal's sensor or contact the manufacturer's customer support for further
Question about Sewing Machines
...Clean the areas around the bobbin and the faceplate, then reassemble everything and see if you are reading the foot properly. It sounds like lint or dust are somehow interfering with the foot
104 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions
