LG 50PX4DR 50 in. Plasma TV "connect tvs receiver via hdmi" Questions

TVs are different in features and the Vizio is limited on its features due to cost. To eliminate the directv receiver connected to Vizio TV just swap with the receiver connected to Sharp TV and see if

TVs connected to the same satellite). I also don?t have audio output to speakers connected via audio receiver. But the program guide displays and the VCR information screen displays and indicates that

...TVs don't have a built-in satellite receiver. You'll need to buy and install a suitable satellite receiver box for the signals that your dish is capable of receiving. The dish connects to the ...

tvs you can adjust the vertical roll is there away to do that on this model? its 2 white bars about 6 inches apart they constantly roll up the screen. is there a special box or cable i need to use for

...tvs and components use this connection. There are adapters available to turn a DVi connection into a HDMI connection. So if your TV does not have a HDMI connection but your HD reciever does you can ...

...receiver, thrOUgh HDMI. still all HDMI PORTS not working. please help. the ps3 has a setting to run on hd tvs. if this is not selected you will have this problem. go into ps3 settings and select ...

...connect the PC to the TV with an HDMI cable if your PC has an HDMI out port. However, some TVs wont accept an HDMI signal from a PC and this method of connection can cause other issues, so I would ...

...via an HDMI cable. Any thoughts? Hi my name is Roety, I can help you with your issue , The cable box signal is received from a round cable called coaxial cable. The guide is sent to the cable box ...

...TVs did not have the capability of decoding analog pay channel signals, hence the little black boxes sold and used ONLY by cable thieves and not any of us here on fixya. For starters, let's make sure ...

...tvs. MY JVC TV model LT32E478, designated as TV1, does not recognize any channels during program scanning. As a result, the timer on/off option does not allow me select an "on" channel. All channel ...