Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor "flip flashes plugged computer" Questions

...flip the main power switch. There is another board on the inside of the TV it is under what I believe is the small signal board it has a lot of microprocessor and such attached to it and also has a ...

hd2200 gateway monitor display will not stay lite I have a hd2200 gateway monitor and I have had only 1 1/2 years. The monitor will not display the screen once it boots up it will flash it up for a ...

flashes forever and if i press the auto set button or the power button, nuthin happens. to turn it off i need to flip the switch under the monitor. after fiddeling it for a while turning it on and off

computer is booting, then after that no display. If I turn monitor off and on again, the display shows only for about a second and then nothing. I cannot see the menu or anything. what could be wrong?

...powerbuttonassemble detaches.Remove frame. Now..holding edges of panel into back cover, lift and flip the whole thing over and place panel face down on a perfectly flat surface..a towel on my desk ...

...powerbuttonassemble detaches.Remove frame. Now..holding edges of panel into back cover, lift and flip the whole thing over and place panel face down on a perfectly flat surface..a towel on my desk ...

...Flashes Samsung 226BW Monitor, just over a year old and it started a few weeks ago, at the start it would take only 10-15 mins for the screen to work but now I have had power going to it for 14 hours ...

...powerbuttonassemble detaches.Remove frame. Now..holding edges of panel into back cover, lift and flip the whole thing over and place panel face down on a perfectly flat surface..a towel on my desk ...

...computer. The other monitor works huh?! I just did this to a friends monitor as well as my own, a different model and not much different in build. Some might have 3 screws on the lower back side of ...

...powerbuttonassemble detaches.Remove frame. Now..holding edges of panel into back cover, lift and flip the whole thing over and place panel face down on a perfectly flat surface..a towel on my desk ...