Question about Canon ZR Video Cameras
Tape transport stuck in open position. Will not take tape into unit. Have a Canon ZR70MC that will not allow the tape transport to close. It is stuck in the open position. Tried to repair, with no ...
...powered on now immediately bings an alert to EJECT TAPE. When I eject the cassette a bit of tape stays inside the camera. The rollers do not release all of the tape. I cannot do anything now with the ...
tape transporter on my Sony CCD FX510 won't close The tape transporter will open correctly. When I insert the cassette into the transporter, the front door closes but the transporter doesn't ...
MV700i The tape transport fails to eject. There is enough power but the geared wheel only moves a small amount then stops under strain and gives up. The carriage does not move upwards at all. I ...
...power it back up. works in 90% of cases!!! There is clear colored IR LED in the centre of the tape transport that may have come loose in it's silver clip or the sensors have come unclipped on either ...
...cassatte' and C:31:23. Why? The timing cam is misaligned. Its' purpose is to eject the carriage, transport the tape into the heads when there is a tape and play or record the tape. If the gear is ...
Question about JVC Video Cameras
...work on the menu and all buttons function. I am scared to put in a tape to see if the tape transport works. The error message comes up after turning on the power for about 10 seconds. It ...
TRAP DOOR WONT CLOSE I had the same problem with my camcorder. I removed the tape transport control from the top of the unit (be careful not remove the attached ribbon cable). It appeared that the ...
...died and does not power up. Any suggestions on how to remove the Mini-DV cassette from the tape transport? Good Day, you need to supply 4.5V DC regulated to the loading motor, however you should ...
...out of focus picture on the screen....what to do??? C32 error codes are usually cassette or tape transport related. Can you eject the tape? Try inserting a new tape to see if the fault is with the ...
94 questions posted
Usually answered in minutes!
156 Questions
143 Questions
137 Questions
73 Questions
57 Questions