Malber WD1000 Front Load Washer/Dryer "making sound something loose" Questions

...sound - which then goes silent when it gets up to speed - with and without wash load. sounds like something may be caugth underneath center column or bearing problem - help! you may have something ...

...sound as the washer drum spins. sounds like something may be loose inside. sounds like a loose belt squeeling? Hi, When my washer did that, I found that the shocks that hold the tub were bad... Check ...

...sound as if something was loose in machine. may need to balance machine on floor and or check the shocks, the balance springs, the counter weights or suspension rods, etc and or the motor ...

...SOMETHING LOOSE IN DRUM WHEN SPINNING The problem seems to be when spinning at high speed it sounds like something is loose and makes the most dreadful banging noise while spinning ,like the is a ...

...loose inside the machine. When it is empty you can manually turn and hear something rolling inside you will have to lvel the machine,cause when its not balanced it will do that,so under the machine ...

...sound when it is trying to start, sometimes it won't start at all. What is the problem? This could be something stuck in the built in disposal at the bottom of the sump, something in the pump or the ...

...something is loose inside. Like a ball may sound inside drum as it turns. Is it a front loader? You may have something stuck between the tubs or it may be a broken "paddle" One of the plastic baffles ...

...something. Other then the sound it makes which is not continuous, the machine does not bring up any alarms or codes of malfunction and pumps water just fine. Any suspicians what it may be? Worried ...

...making the worst sound ever... My Hoover 200m is making the worst sounds ever, it only makes this noise during the "Wash cycle" and the "Pre-wash cycle" during the spinging cycles its fine. The noise ...

...making a huge banging sound during the spin cycle. I pulled the washer out, opened it up to see if anything was broken but couldn't see anything. I re-leveled the washer and now when it runs it ...