Lexmark T642 Laser Printer "nvram factory default settings restored" Questions

...NVRAM settings on the T642 could have been corrupted. You can try to restore the factory defaults by following the instructions in this article http://bit.ly/dn3wIC If that does not fix the problem ...

...NVRAM”   Method 2 (with Config Menu): -          Press CHECK button and RIGHT ARROW button while POR -> Select “Factory Default” -> Select ...

NVRAM”   Method 2 (with Config Menu): -          Press and while POR -          Select “Factory Default”

...NVRAM, or Restoring Factory Defaults on the printer's LCD screen. You can then release the buttons. If the error does not return on power up, continue using the printer but keep an eye on it for the ...

...factory default menu settings by initializing NVRAM. (Does not reset Network or Security settings) 1. Press Menu 2. Press "down" until Configure appears, and then press "right" 3. Press "down" until ...

...NVRAM initialization will return the following device settings to the factory-set defaults: a. Turn off the product. b. Press and hold both the down arrow button and the Cancel button, and then turn ...

...factory defaults (NVRAM reset). To reset the NVRAM, go to the front panel's Main Menu: Select Troubleshooting, then press the OK button. Select Service Tools, then press the OK button. Select Reset ...

...factory ? Resets the default media size to cold reset media size ? Resets the symbol set to PC-8 NOTE The following steps reset the same NVRAM locations that are reset using the Restore Defaults ...

NVRAM initialization performs the following actions: ● Resets all customer-accessible menu settings via control panel and software back to the factory default settings ● Resets the

...NVRAM to the factory defaults. However, unlike NVRAM inititialization, a cold reset does not reset the page count, the paper tray sizes, language, or formatter number. Note If an HP Jetdirect card is ...