Question about Lexmark T Office Equipment & Supplies
...board. if this error comes up immediately on power up the scanner motor is not initializing by percentages of failure the scanner is approximately 85% the logic board 15% i would change the ...
Failure of initial self test During initial self test it announces. SCANNER FAILURE unable to scan, copy, or send a fax. Turn the power off and on and try again. replace the Scanner Assembly
...failure 9050 Scanner initialization failed, and the copy processor board (CPB) is not communicating with the scanner-controller board (SCB). 1. Turn the product off, and then on. 2. Check the scanner ...
...failure - swithch off and on again!! this is the mesage i get any help please. Alan There is 3 reasons for this problem: 1. Logic board ***'y is defective. 2 .Scanner section is defective. 3. Inside ...
SCANNER FAILURE when initializing, align cartridges comes up,says press enter,busy,scanner failure,turn off and on, then repeats the process This is probably a power issue. If you have many devices ...
...scanner failure appears copier worked for years, then would print from computer but not from pages, then wont print at all and scanner failure message pops up I think your printer has been, for some ...
Question about Lexmark T Office Equipment & Supplies
...scanner failure error HP office jet 6210 has a scanner failure error message. What part needs to be replaced? have you tried to reset the printer? (Take the power cord off hold # 3and then turn the ...
Scanner failure, power off and on Scanner System Failure Scanner failed, cannot make copies or fax Scanner failure. Unable to scan, copy, or send a fax Scanner failure, cycle power You may want to try
...scanner. If your printer is freezing with just initializing on the screen then there is a problem. If you have added any extra memory to the printer remove and try to restart. Most common failure is ...
Question about Lexmark T Office Equipment & Supplies
...scanner failure problem on my 2210 HP printer it tries to initialize but light does not go accross when it goes back to right it makes like gear noise continually my name steve merkler me email is ...
170 questions posted
Usually answered in minutes!
129 Questions
130 Questions
122 Questions
152 Questions
41 Questions