Xerox Phaser 8400 Laser Printer "work station error code" Questions

...error 21:11 your service station is not working correctly. you will need to replace that assembly. Service Station/Aerosol Fan cannot be detected or the Service Station is badly adjusted. Corrective ...

...station. Turn off and turn on your printer couple of times. Try moving the carriage assy., manually. Still if it don't work then the service station would have gone bad. Needs to be

...70 showing error code 2210 any help would be appreciated. 22:10 Ink Supply Station failure. Get the Ink Supply Station replaced. Get a tech to do the work. You will not want to do the work

work, we cant turn it off, so we diconnect it from the energy for a minute and try to turn it on again, the green botton of the power turns on but not the screen.. so we disconnect it for weeks and it

...error stands for : 24V source test failure. And i'm sorry to say but the service manual then tells you to try the following: - Replace the scan-axis motor assembly. - Replace the paper-axis motor ...

...work in different Printheads. The possible causes are either fibres or a piece of paper in the Drop Detector or that the Scan-Axis reference is incorrect. Corrective Action: Try the following: ...

...error: check, if something sticks in the machine (paper or metal clip) The paperfeeder clutch gear is broken: check if the paper feeder works well. The purge station has problems to do the cleaning ...

...Station/Harness/Logic PCA Error SS Jammed or SS OPTO Failure Any idea what I can do, appears something disconnected in the move, but what? The problem is with the service station. This is the unit ...

...station sensor. It reports this error if sensor cant read the toner level.As service work, I would say to reconnect the connectros on toner holder unit and connector on toner/developing unit + clean ...