Sony KP-57WV600 57" Rear Projection HDTV-Ready Television "remove pop tv" Questions

...Pop sound was its breaking sound. Lamp replacement procedure is written in user manual, pretty easy. Please buy Sony original lamp for TV safety and avoid aftermarket/ cheap lamp. Let me know if you ...

...and then comes back again. The menu button on the TV itself is bad and must be replaced ( or removed ). Alternatively the whole front button assembly can be disconnected. Just follow the wire ...

...TV and heard a loud pop, then the picture went black and there was a static noise from the speakers for a second then the TV shut down. Now the TV will not turn on and the power light blinks 3 times ...

tv RE44SZ21RD Note: Wear cotton gloves when handling the lamps as it contains mercury. Remove the access cover behind the On/Off switch at the bottom of the rear cover by removing the 2 screws using a

pop, the power button would flash red and another red light to the left of the SD card slot would flash once every five seconds. I removed the lamp and found that it had "shattered" inside. I bought a

remove the lamp and put on the new one. Do not touch the lamp with your fingers, use the glove that is usually provided with it. After that just push the lamp back in put in the screws, then screw the

...over again my first question is have you checked the bulb. the loud pop sound like the bulb blew and the rattling sounds like the lamos trying to fire. remove the bulb cover and unscrew the ...

...TV to display a picture at all. Is this the lamp? Most likely. You should remove the lamp door, pull out the lamp, and inspect it. Look into the center of the lamp, does it look dark or swollen? Does ...

remote? i mean remove the batteries of the remote and remove the tv from electricity and put it back on the tv but not the remote batteries and check if it works normal and if it does buy a new remote

case, remove a few more screws and pop in the new bulb. You just have to be real careful to not actually touch the bulb, as oil from your fingers can damage it once it heats up. Latex gloves work well