LeapFrog My Pal Violet "clean" Questions

...after new batteries fitted it may have some moisture damage as is common with kids toys, try to clean the contacts with dry steel wool or scourer, (even a butter knife will remove any rust/dirt ...

...on There are a number of possible reasons your toy may have stopped working. Sometimes it helps to clean the battery compartment with a dry cotton swab or cloth. Rub the gold contacts inside the ...

Batteries coroded in the system. Cleaned it out replaced batteries, now system will not power on. Forgot to mention system was left in the glove compartment for over a year. Batteries have an acid in ...

...is getting a Q-TIP & RUBBING ALCOHOL, you want to saturate Q-tip with the rubbing alcohol & clean the CARTRIDGE (NOT the Hand held ). You want to clean the computer chip @ the bottom by ...

... What else?????I cant find my instruction booklet? Remove 3 screws from bottom of mouse. Remove and clean "prism" with glass cleaner. Use Q-tip to clean receiver next to LED. Hope this works for you ...

...in Leapster 2, Leapster reboots itself. There were possibility of dirty cartridges-how does one clean the cartridges if they're in tiny slots? If the cartridges can be removed, pull them out and ...

...it means and where they came from two black circles clearly image problem 1st make sure screen is clean. inspect when off. use only cloth slightly damp with water. 2nd make sure it is not the image ...

My leapster middle crosshairs will not calibrate Leapster 1 clean the debris from around the touch screen with a tooth pick but be careful.

leappad turns on and shows only white screen. You can hear the game and could play if the screen wasn't all white. my son clean his ultra leap pad with windex what should I do?

...prevents it from making a connection. I'm afraid the only solution to that would be to thoroughly clean those foils. Which can definitely be done, but you need to be careful! It goes like this: ...