Konica Minolta magicolor 2430 DL Laser Printer "reset drum counter" Questions

...reset the drum counter. (fuse blows to reset the drum life setting) Try upgrading a firmware, Else contact service center to reset the drum counter ( get the program to reset or visit them with ...

...reset the drum counter for a Konica Minolta 2300? The best way to reset the counter is to replace the fuse on the underside of the printer drum. That is not hard to do, but you have to be careful not ...

drum and have the internal counter reset. This may require a service person to call over and fit the new drum resetting the counter as well.. Have you tried checking the printers software installed on

...reset (opc drum counter)? Thanks in advance for any reply Replacing the fuse is only half the job. You also need to empty all the spent toner out of the drum as well. I actually drilled a 1/4 inch ...

Can I reset the drum counter for a Konica Minolta 2400?0 no because there are chips on the image unit not in the machine

Reset the drum counter Do I have to replace a chip? Where can I buy a new and how do I replace it? When you replace the image unit for the color that needs to be replaced then the chip on the NEW ...

...reset the toner is using the service mode. Is this printer a 2300w ? If so, open the front door of the printer, turn on and hold down the cancel button for at least 20 seconds, that resets all the ...

...reset drum counter for fuji xerox 203A Hi Team, Can anyone tell me how to reset drum counter for fuji xerox 203A? Thanking you in advance if the Drum LED is still lit after replacing the drum unit, ...

reset drum counter on a muratec mfx 1430 Drum counter is reset by installation of a "NEW" drum. There is a small fuse at the rear of the drum on the top( you will see the 2 brass contacts) When a new ...

...reset the drum and page counter after changing drum & counter, instructions in handbook says the reset instructions are with the new drum, they are not. Reset the drum counter as follows: Open the ...