unit is use to reset the life of the transfer unit. check the connector on the transfer unit, two visible connectors that connect to the printer inside the machine. then that is the entry point of the
Question about Konica Minolta Magicolor Office Equipment & Supplies
...the main button and waiting for 3 lights - this model doesn't have 3 lights or a main button?) thanks the reset is done via a 'first use fuse' in the drum unit. check the contacts or put in a new
...it, you will have to replace the whole fusing unit and not only the roller and the whole unit it's not cheap at all. Reset your Toners and Imaging units for Bizhub and CF ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...reset it and make printer think it's a new drum. Would you please instruct me how to do that? Thanks. Johnson [email protected] Pull the drum out by the green handle. Hold it up and look for a ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...reset kit like the one's sold on ebay and continue using the old drum? I see drum kits on ebay too. Should I go that route? thanks, ken The drum loses its ability to accept the image after a fair ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...unit - Relaced fusing unit and it won't reset, I read to replace the fuse, where is it. In detail please Wait , i will upload video for you guys, so that you can reset Fusing unit by
Question about Konica Minolta Magicolor Office Equipment & Supplies
...fusing unit?? Is there a chip reset that I can buy for the transfer unit and fusing unit? I just purchsed the resets for the image units and they worked great. I don't know exactly what and where the ...
...reset fuse. This fuse is located on the fusing unit which must be removed and a small cover opened to get access to the fuse. You ca get the fuses from precisionroller.com Their part number is M9970. ...
Question about Office Equipment & Supplies
...reset the transfer unit counter by replacing a fuse in the transfer unit. You must have the proper fuse. There is no way to reset it using the service mode or key sequence. When the transfer unit is ...
...as necessary ecured in position). 3.Reinstall Fusing Unit 4.Open the PWB-P and press reset buton. If the fuser is OK and jus is overheat will be again operational. malintzin check firmware ...
290 questions posted
Usually answered in minutes!
321 Questions
244 Questions
182 Questions
115 Questions
97 Questions