won39;t incline Haven't used it in a while and I went to use it this morning and treadmill won't incline manually. I push the incline button and I hear three beaps like I was pushing
...won39;t go back down. I did the troubleshooting correctly and still won39;t go down. Is there something else I can do? LUBE the rack and gear very well. Adjust the POT small attached, and try ...
...won39;t shut off The other control buttons don't work. When I power on the treadmill, it raises to the maximum incline and then goes back down to the botttom.. never stops until I pull the ...
Question about Nordic Track Exercise & Fitness
won39;t move up or down. Husband raised the incline to 12 for a walk yesterday, and now it won't go down. We've unplugged from the wall, reset with safety key, and tried to calibrate
Question about Proform Exercise & Fitness
...won39;t work in the incline mode. We recently reset it up and started it before we had it in the proper alignment (walking surface to motor) and engaged the incline function. There was a bolt my TM ...
...won39;t respond 1)signal false coming console or display board2) main motor controller is faulty.3)Pot attached of the elevation motor ,need adjustment4) geared slip from elevation motor , carring ...
Question about Proform Exercise & Fitness
...won39;t go up...it was starting to go up then made a noise and it dropped down ... how do i fix it? i have a Proform xp 550 the incline won't go up...it was starting to go up then made a ...
Question about Weslo Exercise & Fitness
...won39;t go around on its o I have a Weslo Cadence C62 treadmill and it hasn't been used in a few years. I tried to turn it on and the power works fine as well as the incline but the running ...
Question about Nordic Track Exercise & Fitness
won39;t incline need a solution Dear Sir:There many possibilities: 1( False signal to due flexible cable loose *tight( 2( console display faulty 3(main motor board faulty 4(the pot
Question about Proform Exercise & Fitness
...won39;t work after replacing While running, the incline motor went berserk and ran up to the top of its travel without stopping, actually pressing against the top housing, then the plastic guide ...
114 questions posted
Usually answered in minutes!
188 Questions
112 Questions
99 Questions
96 Questions
64 Questions