Citizen Skyhawk Eco-Drive JR306059F Wrist Watch "second hand" Questions

Ad

Question about Citizen Skyhawk Watches

1 Answer

hand to second, or press again to switch to minute. Then use crown again to correct 0 position. The hour and the 24 hour hand is in conjunction with each other. then push down the crown all the way in

Ad

Question about Citizen Skyhawk Watches

1 Answer

second hand to zero. The secret is that zeroing the MINUTE hand also controls the UTC display zeroing. You will have to crank it until the UTC display reads 0:00 (24:00). Then go back and set the time

Ad

Question about Citizen Skyhawk Watches

1 Answer

second hand stops at the RX-S position. The second hand will then move to H, M or L found at the 2 o'clock subdial. Remain holding the watch in the same position. The second hand will move from the H,

...windows will flash between RC & RX, the second hand should show signal level between 1 & 3 hr positions. Do NOT move the watch until it has resumed the one second sweep motion and made a

Question about Citizen Skyhawk Watches

1 Answer

hand points to the time mode [TME]. 2 - Press either button (A) or (B) to select the city for which the time is to be set. 3 - Pull the crown out to the second click (3) to enter time setting mode. 4

Question about Citizen Skyhawk Watches

1 Answer

hand should run in single second steps, if it takes steps regularly, but every 3 seconds or so, it tries to tell you that its power level is going down. It will be able to continue for one or two days

Question about Citizen Skyhawk Watches

3 Answers

...second hand directly at 12 o'clock. 5. Push the crown back into its normal position. Set the digiatl time and date in your tie zone, and your analog hands should match the digital read-out. If the ...

Question about Citizen Skyhawk Watches

1 Answer

...the second hand went backwards , and now it has no digital readouts, or bars.. Your husbands watch is in need for new capacitor. Any local Citizen watch dealer can sort this. Rate me,

Question about Citizen Skyhawk Watches

1 Answer

second does not reset to 12 i have a citizen eco drive watch and the stopwatch hand does not set back to 12, how can i re-calibrate thanks You should be able to solve this by pulling out the Crown(the

Question about Citizen Skyhawk Watches

1 Answer

I set my watch to CHR, then pull the crown to second click, hands will not go to 12:00 and digital display is not at 0? Go to http://www.watchuseek.com and join. Ask the same question in the ...

Not finding what you are looking for?
Citizen Skyhawk Eco-Drive JR306059F Wrist Watch Logo

194 questions posted

Ask a Question

Usually answered in minutes!

Top Citizen Watches Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Citizen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...