Singer Confidence 7463 Computerized Sewing Machine "darning plate needle" Questions

...the darning plate to sew on buttons? Raise the needle and presser foot, and position darning plate onto the needle plate with the two pins on the back inserted to the holes on the needle

...your instruction manual. If you dont ordinary needles will score the darning hook and plate good luck to all the solution is above I damaged the darning hook and plate by not using the correct ...

darning plate," which just build up the area around the feed dogs so they don't reach the fabric--pretty inelegant, plus I wonder if you can even find the darning plate anymore. Let me know if you

How do you drop the feed dogs on an elna su? I think you need a needle plate cover, also called a darning plate. It fits over the needle plate effectively dropping the feed dogs.

darning plate to needle plate, covering the feed dogs. Then use the darning foot too, remove the four ankle, the darning foot fits direct it into the presser bar. If you check your manual it shows how

...darning plate) that goes over the needle plate. good luck! The feed dog can't be lowered. Looks like, the Brother manufacturer wants you to buy attachments for the intended use. The darning plate is ...

lever that controls the feed dog position. It might be dropped below the needle plate for darning. Locate this button and see if the feed dog are above the needle plate when you move the balance wheel

darning plate over the regular plate and feed dogs. The pins should lock into the spots on the machine. Place the U-shaped opening of the darning foot over the screw that you loosened previously. Then

or covered with the needle plate cover in the accessory kit). A darning foot is attached to the machine. Then the operator manually moves the fabric back and forth and forward/backward while stitching

...Darning Plate is utilized for free motion sewing. If you have a users manual the instruction should be on page 12. DARNING PLATE Use the darning plate when you need to control fabric feeding for ...