Nikon D3000 Digital Camera "flex error" Questions

...Flex cable OF Zoom Clutch Parts u need a repacment in this case plz rate this post Hi, Its improper attachment of lens with camera error. de attache lens and clean its terminals then reattach lens ...

...error remained If you remove the back cover, there is a flexible circuit on the bottom left that attaches to the rear circuit board. Check to make sure that there are not cuts in the lands caused by ...

...ERROR CODES I revcently have had problems with my camera. My husband used it & it hasn't worked since. I keep getting two errors (E12 & E13). I know that I can't see anyone through the view finder & ...

...error, restart camera. Replaced batteries,no change. If your lens received impact damage it will need to be replaced. This is about a $150 bill at Canon. One thing that can happen is the flex cables ...

...error coming up now d lens arent even coming out. tengo el mismo problema If all mentioned solutions don't work I'm afraid there is one and only solution to this problem - replacing the lens. I had ...

zoom 90-wr camera keeps coming up with a H3 error Its a Flex Strip problem .... U will have to get it replaced from a repairman ...

...error", closes the lens again, and eventually shuts down. The warranty period is over, so should I just throw it in the trash since Nikon won't repair or replace it? John get it repaired from a local ...

error, resart camara ". Can please suggest me on this. well **** that doesnt sound complicated or anything. The lens is crossthreaded, You have to take the camera apart from the back first, rear cover

...error and the lens is not coming out While your camera is switched on, remove the battery. Wait for at least 30 seconds and reinstall the battery (make sure it´s charged). Switch on the camera. ...

...error. I have tried changing SD cards, removing and replacing the battery but nothing works. Have you tried removing the battery and letting everything dry out? Sounds like the flex connecters in the ...