Kenmore 96422 / 96424 / 96429 Electric Kitchen Range "stove loud pop" Questions

approx. 20 seconds later, a loud ''POP'' sound, like a gun shot. Stove went dead, no power except for oven light which works. Circuit breaker is on. Stove is 5 years old. I called the Sears repair man

Stove cutoff after loud popping sound Kenmore Smooth Top Stove, Back right heating element has not been working. Today I turned it on by accident and it made a loud popping sound, red flash and the ...

...Stove. The model number is CPES389CC1. It is about 6 years old. After the loud popping sound the clock display does not work (like it does not have power). The oven does have power though because the ...

...stove made a loud pop while oven was on and then lost power....stove top elements working stove clock not working tested fuse, and changed it still not working Thank you for your post, friend! I ...

stove top and my burned made a loud pop noise but continued to work Usually it's the electrical wire in the back that touched the metal part of the stove and made a short. Check the back of your stove

...stove occured at the same time as the loud pop.i suspect the control panel shorted.part no.316207620.Is this a common problem with this range? Yes. You will have to change the ERC. Usually you can ...

...stove had a flash and a loud pop, blew the main breaker for the house and now the oven doesn't work. The stove top does, but the start button doesn't for the oven. Sounds like your oven element has ...

...and there was a loud pop, sparks and a little bit of smoke that smelled electrical. I unplugged the stove. Do I need a new stove now? always unplug range when cleaning. repair terminal wires on ...

...stove and I hear a loud pop and see a flash of light behind my oven. The breaker blew and when we reset it, the stop top and clock works fine.. the oven (broil or bake), however, no longer heats. I ...

...stove loud pop then blows breaker Loud pop then breaker blows Leave the breaker off, pull the range out and remove the back panel. Once done I would start at the bottom where the plug comes into the ...