Leisure HOMEPRIDE Electric Fireplace Heater w/ Remote "thermal fuses" Questions

Ad

Question about Rinnai Heating & Cooling

1 Answer

The heater is not switching on failed thermal fuse inside the heating element is a thermal fuse prob gone 120deg etc look on its body look up thermal fuse on you tube if you must fix it yourself do ...

Ad

Question about Lakewood Heating & Cooling

1 Answer

...no history of tipping over. The reason that it stopped is an open circuit. It is probably a blown thermal fuse. However, it could be any of the following if that is not the problem: bad switch, ...

Ad

Question about Rinnai Heating & Cooling

1 Answer

...The error can be caused by the high limit sensing overheating and cutting off. In that case the thermal fuse may not blow. The high limit can be reset tripping circuit breaker and allowing the ...

Question about Black & Decker Heating & Cooling

2 Answers

...comes on. It is plugged in, the filter in clean, and it is sitting on a flat surface. There is a thermal fuse in this heater. A 133 deg. C fuse along with a bimetalic thermal cutout is attached to ...

Question about Broan-NuTone Heating & Cooling

1 Answer

...regular lite, vent and heater. The "diode" that your electrician mentioned is actually a one shot thermal fuse.You can either go to the Nutone website for parts, or remove the thermal fuse, extract ...

Question about Dayton Heating & Cooling

1 Answer

the thermal fuse has blown, does that mean that the thermostat no longer works or should it be safe to use on a low setting? The thermal fuse protects you and your unit from overheating. You would ...

Question about DeLonghi Heating & Cooling

3 Answers

Thermal fuses are available and not expensive. The burn-out temperature is printed on the component but the printing doesn't survive much handling. I am told Delonghi appliances have one of the better

Question about Black & Decker Heating & Cooling

1 Answer

There is a thermal fuse in this heater. A 133 deg. C fuse along with a bimetalic thermal cutout is attached to the top of the ceramic heater housing. This fuse is probably open, and is the most likely

Question about Lakewood Heating & Cooling

1 Answer

Thermal fuse on neutral wire burnt out. Im going to bypass thermal fuse, that was on neutral wire, and disconnect the 600 watt element, limiting the wattage to 900. Is this safe? i would not do what ...

Question about Lakewood Heating & Cooling

1 Answer

...is reaching them. The Lakewood 5500 heater may not heat, yet all lights are on, due to the thermal fuse inside the control box being blown. It works like a normal fuse, yet will blow if the ...

Not finding what you are looking for?
Heating & Cooling Logo

362 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Leisure Heating & Cooling Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Leisure Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...