Nordic Track Nordictrack Apex 4100i Treadmill User Part Manual "shows key down" Questions

...down then insert the safety key. The display should show some numbers. Press the stop key one time and the display should show some other numbers and some 00's. Press the Incline Up button and see if ...

...key when "CAL/PRSS/STRT" shows on the readout. If readout fails to show the "CAL/PRSS/STRT" symbol, turn off machine and turn it back on. Press "ENTER" and then "DOWN SPEED" at the same time until ...

...down the runs for a second or two and then stops showing the E7 error again. Please advise . To fix the error you have to put the safety key in start it it and wait for it to say E7. Now press stop ...

...key, hold down the "start", "stop" and "Enter" buttons, keep holding them down while putting the red key back in (a bit tricky), keep holding the keys down until you see "Maintenance menu" scrolling ...

...key when "CAL/PRSS/STRT" shows on the readout. If readout fails to show the "CAL/PRSS/STRT" symbol, turn off machine and turn it back on. Press "ENTER" and then "DOWN SPEED" at the same time until ...

...shows ff or 2f your upper console will need to be replace. Next step if eprom passes: Press either incline key and the incline will calibrate automatically. DO NOT STAND ON THE WALKING BELT.Press the ...

...key off and replace it the E4 error code shows again. The treadmill was working fine until I moved it a foot and then the error code shows - meaning I'm suspecting a lose cable but I don't know where ...

...key and hold it down until 85 is shown in the Distance window (some models may show the 85 number in another window If the belt does not move in this mode then the controller board is defective and ...

...of the speed, press the Speed Down key. The treadmill will automatically return to 0 MPH. Please allow the unit to stop completely before continuing. Press the Stop key once and remove the safety

...shows up To reconfigure the controller to factory setting:1) Hold both the "Mode" and "Stop" buttons down while removing the magnetic key.2) While continuing to hold both buttons down, replace the ...