Question about Exercise & Fitness
reset button but still nothing. i am stuck, what should i do? thank you It is likely the connections to the incline motor are loose or the incline motor itself is faulty. Refer Troubleshooting section
stuck on the 12% incline position and it wont go back down and I have tried to reset it by turning it off, switching the reset button to off and then on or even unplugging it several times. What would
stuck in the incline position. I have tried everythin in the manual to reset it but it doesn't work. I can hear the motor trying to work but nothing moves. Any ideas? Under the motor shroud their is a
Question about HEALTHRIDER Exercise & Fitness
stuck in the highest incline position. How do i get it level again? Try putting the key in while holding the down incline button in. This resets the height mechanism. Repeat with the up incline button
Question about Nordic Track Exercise & Fitness
...stuck up high and would not return down. I found the calibration mode. I ran the incline per instruction. It moved all the way to the top 12% incline position, but on the return down, stopped after ...
Incline is stuck, motor still runs? First try to calibrate the incline as described in your owners manual. Start the machine. Press the incline up button. While pressing the button, remove the safety ...
Question about Proform Exercise & Fitness
stuck in the upright position and the controls will not move it. Is there a way to reset the incline and the controls for it to get it working properly again, or at least get the incline down to level
Question about Exercise & Fitness
...stuck on incline 12 and wont move up or down tried all the resets? Go into engineering mode by pressing the stop and speed up button at the same time while inserting safety key. Once in mode, press ...
stuck on incline So we have a Proform 590Qs treadmill that when we plug it in starts to incline on it's own and the decline button does not work. We've tried the reset and even opened the cover to the
...stuck When turning on the treadmill, it will only incline then decline over and over. Already unplugged and reset. Did not work. Run the software calibration for fix it.go under the HOOD motor and ...
479 questions posted
Usually answered in minutes!
56 Questions
48 Questions
44 Questions
33 Questions