Kenmore HE2 Plus Front Load Washer "motor control unit error" Questions

Ad

Question about Kenmore HE2 Washing Machines

1 Answer

...Motor Control Unit (MCU), or the interconnecting wiring between the two. Could be a loose connection in the harnesses, dad Motor, bad motor control board, bad main control board. It's most likely ...

Ad

Question about Kenmore HE2 Washing Machines

1 Answer

...motor control unit error which means that the motor control unit has repeating under or over voltage or over current conditions due to internal failure. You can check the wire harness connections ...

Ad

Question about Kenmore HE2 Washing Machines

1 Answer

motor control unit is broken/loose, the motor control unit is malfunctioning, the connection between the central control unit and the motor control unit is broken/loose, or the central control unit is

Question about Kenmore HE2 Washing Machines

2 Answers

...motor control unit and central control (MCU, andd CCU that is main control module). Repair is difficult, as motor, wiring and voltages from control modules must be tested. Try first doing a reset, by ...

Question about Kenmore HE2 Washing Machines

1 Answer

...CCU (central control unit) Broken wire. Check the harness closely between central control and motor control unit. Remove the bottom panel and fish out the tech sheet. Duet manual and more photos ...

Question about Kenmore HE2 Washing Machines

1 Answer

...motor control unit) and CCU (central control unit) Broken wire/ corroded harness connection maybe? Take the service panel off at the bottom and look for the tech sheet for your washer. It is in a ...

Question about Kenmore HE2 Washing Machines

1 Answer

...Motor Control Unit) failure. It is displayed if the heat sink gets too hot and then the MCU stops motor, then MCU sends the signal to CCU (Central control unit). Please check the wire connections ...

Question about Kenmore HE2 Washing Machines

1 Answer

...motor control unit (MCU). To start with check the wire harness connections between CCU and MCU, and then check the motor. If both of them appear to be working fine then it seems that the MCU of your ...

Question about Kenmore HE2 Washing Machines

1 Answer

...motor control unit (MCU). To start with check the wire harness connections between CCU and MCU, and then check the motor. If both of them appear to be working fine then it seems that the MCU of your ...

Question about Kenmore HE2 Washing Machines

1 Answer

...It may be that the drain pump is not the problem at all. Error Code F-28 on the Kenmore HE2 means that there is a signal error between the Central Control Unit (CCU) and the Motor Control Unit

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

2,986 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...