Kenmore HE2 Plus Front Load Washer "clean pump lit washing machine" Questions

Ad

Question about Kenmore HE2 Washing Machines

1 Answer

...clean and pump is working. Hello F1 is a communication failure related to the circuit board.You may be able to check for any loose connections at the main board if possible. Maybe,unplug unit for 5 ...

Ad

Question about Kenmore HE2 Washing Machines

1 Answer

...pump. I tried to run the diagnostic test, but I don't think it worked. All the panel lights lit up, but then nothing happened. All the lights went out and the "clean washer" light started flashing. I ...

Ad

...whirlpool washing machine AWO/D4705 On the front of the washer a light has lit up, it says clean pump. Can you advise me on how to do this? Washing machine is still full of water? how do i clean ...

Question about Kenmore Washing Machines

1 Answer

...lit. Cleaned out the pump trap as per suggestion. Found a lot of stuff - change, nails, construction screws and a small gold chain. Removed the pump and checked teh impeller for damage, obstructions. ...

Question about Washing Machines

2 Answers

...clean pump is lit ! How do you clean pump ? On the lower front panel is a small door which may be behind the kick panel. Behind this door is the drain filter.. Do not undo this filter till you have ...

Question about AEG Washing Machines

1 Answer

...lit together, plus there is a continuous high tone. any help would be great thanks hi, This means your water sensor has detected a leak. it will stop when the sensor is dry. Try getting the water out ...

Question about Miele Washing Machines

2 Answers

...clean that out-if you still are getting the message,there may be a problem with you drain pump-check it for blockage. the check inlet means you have a water supply problem-either blockage or no ...

Question about Fisher and Paykel Washing Machines

1 Answer

water streaks on the pump windings but it does me no good to worry about that when it won't even light up anymore. . Plug off the wall; dismantle & clean out your pump. This is if your filter is clean

...the drain pump filter and clean if required Check the air chamber and pressure sensor hose Check drain pump, normal resistance is 152-175? Check drain pump rotor Check connections to water drain ...

clean clothes out Doors remain locked if program doesnt complete correctly.most likely pump blocked .to unlock take drain hose from wall and hold down low to ground as u can WATER WILL come out so use

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

2,986 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...