Question about Solar Electrical Supplies
...light kit - replacing 2-wire pull chain switch, but (dummy me) removed old b-4 noting how wires were connected - 2-blk wires off switch: if 1 goes to blk (hot) from fan, where do I put the remaining ...
Question about Electrical Supplies
...then you need to replace switch. You need to turn off the breaker or remove the fuse powering that switch first. remove the wires from switch, and put wires back at the same screws on the new
Question about Westinghouse Electric Electrical Supplies
wires together (then supply power), if nothing lights, then the 4th wire is hot. Otherwise 2 bulbs should light. Remove one wire from this trio. If nothing lights, the wire you just removed is the hot
...remove glue from wires/cables. The wires have now come off and I need to restick the wires to the skirting but first need to remove the old dried glue try nail polish remover, or cigarette lighter ...
Question about Electrical Supplies
Neon light is lit on Double Pole Spur Box ans fuse is removed I have wired a Double Pole Spur Box in to a Extractor Fan all is working but Neon light remains lit with Fuse removed You have removed the
...Remove old-switch from fan Strip back wires Separate wires so they can be tested. Turn on power. Test each wire to bare copper wire -or- to green wire -or- to metal part of fan One of the fan wires ...
Question about Leviton Electrical Supplies
...Remove device. Separate wires for testing. Use ordinary 2-prong tester. Tape wood sticks to tester leads to keep hands away from power. Turn on power. Test each wire to bare ground wire. Tester will ...
...Remove PLW01 and you have Hot and Load wires. Standard light switch has two brass colored screws, and one green ground screw. Connect either wire to either brass screw. Connect bare ground wire to ...
...light switch.Switch has a short.http://waterheatertimer.org/How-to-wire-switches.htmlTake photo of switch and wiring before removing wires, so it is easy to re-identify what wire went to which ...
wires back to the switch, get the closet light to come on, not affect the kitchen and bath lights and remove any shock that my come afterwards? Thanks for your help. At the switch you have a feed wire
6 questions posted
Usually answered in minutes!
55 Questions
32 Questions
32 Questions
23 Questions
19 Questions