...dimmer to a switch The dimmers wire are connected like Yellow to black-white, Blue to red, and black to black. How do I connect to a 2 screw switch.. stop. you are not qualified. call an
...dimmer switch. It used to operate track lighting along with an on/off light switch in the same room (different entrance). I replaced the track lighting with a fan which has a light and ...
Question about Electrical Supplies
...switch and replace it with atoggle dimmer 600W This toggle dimmer has 2 black wires and one green wire No, not unless the transformers and LEDs are rated for dimming and the switch is rated for
Question about Leviton Electrical Supplies
...a red, green,and red,2 black wires what wires go together I only want to control one light in 1 location Al http://www.automanualparts.com/wiring-diagram-for-3-way-switch-with-dimmer/ use above ...
...switch >> cap it off with wire nut Dimmer orange wire connects to ballast Dimmed Hot Dimmer red wire connects to ballast Hot Dimmer white wire connects to ballast Neutral Those are your wires ...
4 WIRE DIMMER SWITCH DIAGRAM 1 RED ,1 GREEN, 2 BLACK Green is ground. Both blacks are hot Red is neutral (white)
Question about Pass & Seymour Electrical Supplies
...switch goes to the Load? And which goes to Hot from breaker box? You can test or you can simply hook up the device. If it doesn't work, swap the two wires. It just won't work until the 2 wires are ...
Question about Leviton Electrical Supplies
...switch and see if the 2nd sconce works. If it's still buzzing, try to determine exactly where the noise is coming from. Some dimmers won't work with florescent bulbs, some don't like halogen bulbs. ...
Question about Leviton Electrical Supplies
...dimmer to switch and what do I do with leftover wires. The dimmer has yellow, black, blue wires. These are hooked to Yellow to black-white, blue to red, black to black. How do they connect to a 2 ...
...dimmer switch to just a light switch. It has a black a red wire, which ones do i have to connect to the switch? Hi Kerri, First, be sure the power is off at the circuit breaker. If I understand you ...
6 questions posted
Usually answered in minutes!
55 Questions
32 Questions
32 Questions
23 Questions
19 Questions