SOURCE: I need a wireing diagram for a 2000 roadstar
see if this works, thanks steve
http://www.dynaonline.com/skins/downloads/instruct/DDK7-2.pdf
SOURCE: Paint codes for 2005 Yamaha Roadstar Black & white
http://www.colorrite.com/matrix-colors.cfm?CFID=1620536&CFTOKEN=74145802
Go here my friend.
Bob
SOURCE: want to change belts on roadstar
yes start with the manual, have a good lift for the bike and then be prepared to disassemble the rear tire, and complete swing arm out of the bike to change the belt. This is no job for a beginner!
SOURCE: Yamaha Roadstar 1700 Midnight sticky shift lever
make sure linkage is adjusted correctly. dry lube the levers moving part
SOURCE: How do I program my clock on my 2001 Yamaha
View the service manual at this URL : http://www.scribd.com/doc/17625151/servicemanual1602082008 : and scroll down to printed page 3-62 or electronic page 120.
Copying from that page:
1. Turn the main [ignition] switch to "ON".
2. Press both left and right buttons simultaneously [i.e., the 2 buttons below the speedometer glass] until both hours and minutes flash
3. Push the left [mode] button and the hour display will flash
4. Push the right [right] button to change the hours.
5. Push the left button and the minute display will flash.
6. Push the right button to change the minutes.
7. Push the left button and both hours and minutes will flash.
8. Push the right button for two seconds to set the clock.
Testimonial: "Awesome answer thank you so much!"
630 views
Usually answered in minutes!
×