Can I bypass the petcock on a Kawasaki Ninja ZX6?

Question edited for clarity.
Question moved to model category.
ZZRrocket · #8 · Mar 1, 2006

Just got off the phone with my service manager at my local Kawasaki dealership. "She" looked up the torque wrench setting for the clutch spring bolts. Its the same as a 2000-2002 ZX6R and 2005-2006 ZZR600.
Torque- Clutch Spring Bolts: 8.8 N-m (0.90 kgf-m, 78 in-lb)

Service Manual

http://zx6.us/docs/Haynes%20ZX600D-E%20-Service%20Manual.pdf

Kawasaki ZX600 (ZZ-R600 & Ninja ZX-6) Service and Repair ...zx6.ushttp://zx6.us > Haynes ZX600D-E -Service Manual PDF. A book in the Haynes Service and Repair Manual Series. All rights reserved. ...
Kawasaki. The Green Meanies by Julian Ryder. Kawasaki Heavy Industries. 243 pages

Refer to repair manual,or motorcycle repair shop.

you need to see if you have a spark at your plugs...this is your first step

and the problem is?, some carbs are canted over.

you need to check your tank vacuum pipe

LET BIKE SIT FOR 5 MIN. STAND BIKE STRAIGHT UP.(WITH OUT KICK STAND TOUCHING GROUND) LOOK ON RIGHT SIDE OF BIKE THROUGH SIGHT GLASS. OIL SHOULD BE HALF TO A LITTLE ABOVE CENTER OF GLASS

check on ebay

Just a thought, if you are running ethanol fuel it will lower the bikes idle speed. If you run no ethanol fuel your idle speed will go up. Turn your idle screw to raise the idle . Hopefully , your problem is just that simple.

Check the head switch to begin with,if thts ok thn proceed to check the head light wiring from the bulb backwards to the switch, there may be somewhere or by the connectors tht it has fallen lose.
Hope this helps!