My 1999 nomad has no power available

There are some wiring diagrams here. The top two links at broken

https://vulcangadgets.com/files/nomad_wiring_diagram.html

https://www.google.com/search?q=Wiring+diagram+For+Skyline+Nomad+287

..

take it back to the shop for rework as they have not done the job properly

• The inertia fuel shutoff switch is located behind the driver side scuff panel. An access hole is in the scuff panel to access and reset the fuel shutoff switch.

NOTE: In the reset position, the button can be pressed an additional 1.59 mm (0.0625 inch) against a spring. This is a normal condition.
To reset the inertia fuel shutoff switch , press button on top of inertia fuel shutoff switch .


saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Do you have full battery power coming out of the relay ?

What year and which engine ?

13 years is good run for clock motor. Timer will last longer than clock motor.
Open following link to identify timer
http://waterheatertimer.org/Tork-timers-and-manuals.html#1101
Tork 1104 has 240Volt clock motor

Frontier lighting sells the >> 120V Tork motor: List price 40.33/ your price 45.49
So 120Volt replacement motor costs as much as new replacement timer
http://www.frontierlighting.com/product.jsp?part=10431&process=search&show=&&gdftrk=gdfV22514_a_7c834_a_7c3267_a_7c10431

Intermatic replacement is240 volt T104 timer for $49.62 with 'free' shipping:
Also Intermatic trippers and clock motors are cheap and easily available
http://www.amazon.com/Intermatic-T104-208-277-Volt-Mechanical-Switch/dp/B000BQOX88
Crossover wiring from 1104 to T104.
Tork L goes to Intermatic 1
Tork 1 goes to Intermatic 3
Tork x goes to Intermatic 2
Tork 2 goes to Intermatic 4
Intermatic A is not used unless you have neutral wire or 277V
http://waterheatertimer.org/How-to-wire-T104-Intermatic-timer.html

GE sells the same 240Volt Tork timer under GE model 15307 in indoor-outdoor enclosure available at Home Depot for $59.00. Year 2011, GE does not pay US income tax, but takes US profits and pays tax in foreign nations. No replacement clock motor is available, but crossover wiring is same.
http://waterheatertimer.org/GE-timers-and-manuals.html#15306

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

No, Chrysler does not use an inertia fuel shutoff switch like ford. There is nothing resettable or anything like that with the fuel system. You can disable it by pulling the ASD relay or fuel pump relay/fuse. If you have a problem, you can check your relays and swap them around to see if that solves your issue.

Hope this helps!

Can I see photos

specs' What are you looking for fluid capacity? filter number? output specifications in tork foot pounds at certain RPM range?

yes