2011 Aprilia SR 50 R Factory Logo
Kathleen Mente Posted on Oct 28, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How to empty gas tank - 2011 Aprilia SR 50 R Factory

1 Answer

Strech

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Aprilia Master 1,562 Answers
  • Posted on Oct 28, 2013
Strech
Aprilia Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 15, 2012
Answers
1562
Questions
0
Helped
484856
Points
4382

Pull gas line from gas tank to carburetor/injector/throttle body.

If carb, turn on petcock, allowing gas to flow into a gas can.
Remove gas cap to improve/increase flow.

If injected, turn on ignition to cause fuel pump to turn on, flowing fuel under pressure into gas can.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

If the fuel gauge is in empty, how many Kilometer than can support the fuel?

APPROXIMATELY 2 GALLONS MAY BE LEFT IN THE GAS TANK. NOTE: ALLOWING THE GAS TO DROP NEAR EMPTY REPEATEDLY WILL CAUSE THE FUEL PUMP TO WEAR QUICKLY BEING MOST CARS TODAY HAVE THE FUEL PUMPS IN THE GAS TANK,WHICH KEEPS THEM COOL & LUBRICATED
1helpful
1answer

How do you remove or clean trash out of gas tank on craftsman lawn tractor 917.20390?

remove the tank, empty old gas an trash. put fresh gas in an swirl around an empty again. should be clean then. reinstall gas tank.
1helpful
1answer

Gas gauge reading empty but gas is in tank

There is a sender unit failure. Likely it would need to be replaced.
0helpful
1answer

2002 Saturn VUE Gas gauge reads empty with a full tank of gas. What is problem?

possible blowen fuse or a bad sending unit inside fuel tank also check the connections at the tank
0helpful
1answer

My gas gauge is stuck on empty, how to fix

if your gas tank is empty of course the gauge is empty,but if the gas is full and the gauge still empty all you have to do is to check the float valve inside the gas tank maybe it is stuck.Or need to change if necessary.
0helpful
1answer

Which gas tank empties first on a 2001 chevy suburban?

I'm not sure about a Suburban but I have a 2001 Chevrolet truck with two tanks and they empty simultaneously so when the gas gauge says empty that means both tanks are empty.
0helpful
2answers

Says gas is empty but when at the pump its stops filling.some gas exits back from the tank, I figure its my pin any way to find out if im full or not?

What Pin? Your sending unit is most likely worn out,on a 19 year old vehicle. Pull gas tank and replace complete assy,fuel pump and all,while your there.
1helpful
1answer

1994 Dodge Dakota Gas Guage not working all the time

Sounds like the sending unit is bad in the tank.
2helpful
2answers

Gas gauge reading empty even when tank is full

Usually if the gas gage does not work yes it is true it may be the sensor if it is electronicly controlled. the sncor will more than likley be in the tank. here is how to remove your gas tank.

  1. Before servicing the vehicle, refer to the precautions section.
  2. Relieve fuel system pressure.
  3. Drain the fuel tank.
  4. Remove or disconnect the following:
    • Negative battery cable
    • Fuel filler and vent hoses
    • Fuel tank skid plate
    • Fuel tank wiring connectors
    • Fuel supply and return lines
    • Fuel tank
    • Fuel pump assembly
      7924bg17.gif Fuel pump assembly mounting
To install:
  1. Install or connect the following:
    • Fuel pump assembly
    • Fuel tank. Tighten the bolts to 27 ft. lbs. (36 Nm).
    • Fuel supply and return lines
    • Fuel tank wiring connectors
    • Fuel tank skid plate
    • Fuel filler and vent hoses
    • Negative battery cable
  2. Start the engine and check for leaks.
Not finding what you are looking for?

218 views

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66975 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...