I was wondering if you can email me the timing specs for a 1994 Suzuki King Quad 300? My email address is: [email protected] Thank you~
I need a manual or specs how to set the timing on a 93 Suzuki King Quad 300 ATV. Timing chain broke, bought a new one, jumped time. Need help.
Please help! I need a a manual, or info on any repair information, on a 300 king quad desperately. I have a hub bearing hanging up, valve tap, runs a bit off when it warms up... been looking for hours. Thanks, E-mail @ [email protected]
Engine Type: 4 stroke, single-cylinder, air-cooled, SOHC
Bore: 68.5 mm (2.697 in.)
Stroke: 76.0 mm (2.992 in.)
Piston displacement: 280 cc (17.1 cu. in.)
Compression ratio: 9.2:1
Transmission:Five-speed with reverse and three-speed subtransmission, automatic clutch, 2WD, 4WD, 4WD lock
Wheelbase: 1165 mm (45.9 in)
Dry Weight: 275 kg (606 lbs)
Overall length: 2080 mm (81.9 in.)
Overall width: 1130 mm (44.5 in.)
Overall height: 1080 mm (42.5 in.)
Wheelbase: 1165 mm (45.9 in.)
Ground clearance: 210 mm (8.3 in.)
Front Track: 860 mm (33.9 in.)
Rear Track: 860 mm (33.9 in.)
Seat height: 810 mm (31.9 in.)
Dry mass: 275 kg (606 lbs.)
Carburetor: Mikuni BST31SS
Starter system: Electric & recoil
Transmission: 5-forward, 3-subtrans. w/reverse
Gearshift pattern: All up, foot operated
Drive system (front): Shaft drive
Drive system (rear): Gear drive
Front suspension: Independent, double A-arm, oil damped, 5-way preload
Rear suspension: Fully independent, oil damped, 5-way preload
F. wheel travel: 100mm (3.9 in.)
R. wheel travel: 125mm (4.9 in.)
Front brake: Drum
Rear brake: Drum
Front tire size: AT 24 x 8-11
Rear tire size: AT 25 x 10-12
Headlight: 12V 30/30W x 2
Fuel tank, including reserve: 12.0L (3.2 gal.)
Engine, oil change/filter: 3500 ml (3.8 qt.)
Load capacity: 390 lbs. (including tongue weight)
Towing capacity: (gross trailer weight)400 lbs. on uneven ground904 lbs. on level ground
Rack capacity: (front): 66 lbs.
Rack capacity: (rear) 132 lbs.
Sent you via email. let me know what else you need while I have the manual...
4,899 views
Usually answered in minutes!
Cam timing? Its a 1994 Suzuki King Quad 300 (four-wheeler)
Hi,
I need to know how to set the valve timing on the 300cc air cooled King Quad. When I look in from the left hand side with the rocker box (cam cover) off I can see two lines on the end of the camshaft. I take it these should line up with the machined face on the head to be horizontal when the piston is top dead centre?
Also, does anyone know the valve clearances?
Thanks,
Mark
Need timing info for Suzuki King Quad 300 1995
I NEED TO KNOW HOW TO SET THE TIMING ON AN 2000 SUZUKI KINGQUAD 300
Cam timing or ignition timing?
×