1999 Chevrolet Malibu Logo
Anonymous Posted on Jul 29, 2011

I have a 99 malibu with a 3.1L engine. my check engine light came on and then started to blink, after scanning the car with a code reader it showed a PO300, PO113, and P1404. after reseaching the definitions of these codes i descovered what each code ment. I have changed the spark plugs and wires and cleared the codes. shortyly after the check engine light came back on and started to blink again. i rescanned and the code PO300 is the only code still showing. i understand that the blinking check engine means that there is raw fuel leaking into my catalitic converter and there is a fuel odor present. the PO113 AND P1404 codes are not present only the PO300. i can feel the engine misfireing and i can feel the vibration from the engine and also see it, the vibration shakes the whole car. i have checked the coil packs and there is no evidence of burning or scarring that i have noticed. please help

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,702 Answers
  • Posted on Jul 29, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Nov 11, 2010
Answers
1702
Questions
0
Helped
767560
Points
5420

The flashing light is telling you the engine is miss firing, not that there is fuel in the exhust a miss fire is the only thing that will cause the light o flash the P0300 is a random misfire so i cant tell you witch cylinder but replace the coils that should take care of it....good luck

  • bmklg9ds0g Jul 31, 2011

    Hot summer day is about to,Open the wardrobe is not yet found love after
    another the right clothes? So, also waiting for? Immediate action bar!
    Welcome to {http://www.famalegoods.com } sure you will find what you need.
    Moreover, the company has a good reputation, product quality standards,
    at reasonable prices. Over the years, has been well received by overseas
    friends for their support. Therefore, please rest assured purchase.

    ++++http://www.famalegoods.com ++++++++++

    Best online store

    Best quality, Best reputation , Best services

    ---**** NHL Jersey Woman $ 40 ---**** NFL Jersey $ 35

    ---**** NBA Jersey $ 34 ---**** MLB Jersey $ 35

    ---**** Jordan Six Ring_m $36 ---**** Air Yeezy_m $ 45

    ---**** T-Shirt_m $ 25 ---**** Jacket_m $ 36

    ---**** Hoody_m $ 50 ---**** Manicure Set $ 20

    ---**** handbag $37 ---**** ugg boot $43 ---****

    ---**** sunglass $16 ---**** bult $17 ---****

    ++++http://www.famalegoods.com ++++++++++

  • Anonymous Sep 05, 2011

    Hey johnjnail,
    I have a miss fire on mine and replaced the coils and the spark plugs and cylinder 1 is still miss firing. Any ideas on what else it could be?

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kia Picanto 1.1 won't start.

You need an auto-electrician to connect a code reader or a pro grade scan tool computer that can scan data in real time. It will tell what is happening when the car starts to fail.
0helpful
1answer

99 Silverado engine light on cannot get a code from odb reader

Does the code reader power up ? Does a message no communication show on the screen ? Is there B+ voltage at pin 16 in the DLC ? If all that is good try a auto parts store ,they check codes for free .
0helpful
1answer

How to reset check engine light on chevy malibu

You need an OBD-II scan tool to do that. You can get them at auto parts stores fairly cheap. Be sure that the one you get is not just a code reader....some will read but not reset codes.
0helpful
1answer

Bad vibration or shuddering and check engine light is blinking

have it scanned with a code reader to see what if any fault it picks up, Toyota dealer might be a good idea here.
0helpful
1answer

2005 malibu wont idle

Hi there:
Is the check engine light on or blinking? A blinking light means that the engine is misfiring bad. I suggtes scanned the computer car in order to know fault codes stored there.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
0helpful
1answer

I have 99 Chevy Malibu. My check engine light came on. The original codes were for a cylinder misfire and a small emissions leak. I replaced the injector for the cylinder that was misfiring as well as all...

well if you get it scanned again, and you get a lean bank 1 and 2 code then you may have a intake manifold gasket thats leaking. I just worked on a van that had them codes. and I ended up changing the intake manifold gaskets to get it to pass the emissions test for inspection, I live in new york state, po171 and p0174 are the lean codes. we did the maf sensor, new 02 sensors, egr valve and still got this lean code. good-day and god blessyou. it was on a 99 ford windstar van.
0helpful
1answer

Reset button for the computer on a 99 Malibu.

No vehicle has a reset button

You disconnect the battery cable
or use a code reader or scan tool
6helpful
1answer
0helpful
1answer

2005 TAHOE CHECK ENGINE LIGHT IS ON AGAIN

The engine light could be on for an unrelated reason. Most major auto parts stores will scan and clear codes for free or have a loaner you can use on site. The reader plugs into a port under the dash on the drivers' side....get the code number, then clear it with the reader. If the same code comes back, post it here or Google it for additional help
1helpful
2answers

Check engine light comes on

Do you hear the air pump run when you start the car? No? Check the A.I.R. pump fuse in the under hood fusebox. if it is blown then you probably need a new air pump motor. If the fuse is not blown then the relay could be the culprit. if you can hear the pump running when you start it the engine then you probably just have some wiring issues from the relay to the ecm it can still work ok but fail the resistance test that the computer runs randomly. Give some more info and I'll help you through this.
Good luck.
Please rate this response , and let me know if ya need more help!
Not finding what you are looking for?

1,286 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...