DTC P0755 - Shift solenoid valve B
This warning is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
The P0755 code is detected when TCM detects an improper voltage drop when it tries to operate the solenoid valve.
Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears.
Possible causes:
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid B valve
- Shift solenoid B valve harness or connectors
- Shift solenoid B valve circuit is open or shorted
When the a transmission solenoid is malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.
Additional test details could find in this link about Repair/05/2011ne09/cip0755 (pdf)
Hope this helps (remember to rate and comment this answer).
P0755 Shift Solenoid B Malfunction...Possible causes are:
* Solenoid is stuck open or closed.
* Valve body clogged or valve stuck.
have the fluid changed and get a basic transmission service, some thing is caught in the valve body to throw this code, , if after the service ,, its still a problem you may have to change the sensor itself
A good answer from ZJ Ltd
http://www.fixya.com/cars/t9672431-code_p0755_toyota_camry
3,702 views
Usually answered in minutes!
×