Jack and tire wrench location 2005 Pacifica - 2005 Chrysler Pacifica

you don't need to anything. I would check tire pressure check spare, have jack lug wrench, if it is getting close to oil change do it, check coolant level windshield washer fill it. and my rule at 1/2 tank stop and fill it up, don't wonder if i went further it may be a penny cheaper. If you have 16 gallon tank from empty to full 32 cents difference you can't dispense that small amount.

How To Lower Your Spare Tire - YouTube

? 1:27
https://www.youtube.com/watch?v=6rLi0I7vRIw
Mar 30, 2011 - Uploaded by Garden City Jeep Chrysler Dodge Ram SRT
The staff at Garden City Jeep Chrysler Dodge are ready to help you. ... Garden City Jeep Chrysler Dodge has The Can-Do Crew show you how to lower your spare tire. ... Pacifica, Durango, Charger and Liberty for the Hempstead, Queens, Brooklyn ...Installation of a Trailer Hitch on a 2006 Chrysler Pacifica ...Missing: nut ‎sided ‎adapter ‎stored

Fix a Flat Tire: Chrysler Pacifica - CarCareKiosk

www.carcarekiosk.com/...Chrysler_Pacifica...3.../change_a_flat_tire

Free video on how to fix a flat tire in a 2005 Chrysler Pacifica Touring 3.5L V6. Complete instructions for using the jack kit and spare tire in a 2005 Chrysler Pacifica... Most Chrysler jack kits include the jack, a jack handle and a lug nut wrench.

either behind the seat or in the motor section under the hood on the fender wall

It's probably hung up on center hub. They get a corrosion build up and stick. Try spraying liquid wrench or similar lube on center of wheel and work(rock) tire side to side alternating top and bottom. BE CAREFUL NOT knock it off jack. Hopefully you have it on jack stands

Hello! Here is procedure to remove spare tire...Guru...saailer

1. Park on a level surface and put on the emergency brake. If the car is near the side of a road, switch on the hazard lights.
   
2. Locate the tire repair kit. It consists of a jack, a jack rod and a wheel nut wrench. In the regular cab, pull the entire seat bench forward. The tools are located behind the drivers seat. The King cab model has a tool case located directly behind the driver's seat. The Crew cab stows the tools behind the back bench. Pull the bench forward and remove the tools.
   
3. Insert the square end of the jack rod into the square hole in the nut wrench. This gives the jack rod a handle.
   
4. Find an oval shaped hole in the back of the truck under the middle of the tailgate. Look through the hole and find the winch for the spare tire. It is a circle with two notches.
   
5. Insert the T-shaped end of the jack rod into the hole. Slip the T-shape into the double notched circle of the winch.
   
6. Turn the jack rod counterclockwise to lower the spare tire to the ground.
   
7. When the tire is completely lowered to the ground, remove the center retainer chain and pull the tire out from under the truck.
   
8. Wind the jack rod clockwise to completely retract the retainer chain
   

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

go to any auto parts store and buy you a hydraulic jack,very inexpensive and more reliable on the road or at home,you will be glad you got it.also get a universal lug wrench there if you don't have that either.








TIM...........

This particular car has the tire pressure monitoring system on it with sensors in the wheels. If the sensor was messed up when it was reenstalled on the new rim it would throw this code. Some vehicles have the sensors with specific mount locations and if one of the sensors was reenstalled in the wrong location it could cause this fault. You can take it to the dealer and have them check the sensors and see if all are reading properly and are in the right locations.

Location of the spare tire and tools
The spare tire and tools for your vehicle are stowed in the following
locations:
Item Location
Spare tire Under the vehicle, just forward of
the rear bumper
Jack assembly Under the third row bench seat in
the tool bag
Removing the jack and tools
1. Lift the 3rd row seat cushion.
2. Remove the jack assembly from the bag under the seat.

Removing the spare tire
1. Open the liftgate, locate the U-shaped slits in the carpet, and flip up
the piece of carpet to expose the hex nut.
2. Insert the lug nut wrench on the
hex nut in cargo floor.
3. Turn the wrench
counterclockwise until tire is
lowered to the ground and the cable
is slightly slack.
4. Remove the retainer from the
spare tire. It may be necessary to
lift one end of the tire to disengage
the retainer

1).First you will need a jack, and a socket wrench.

2).Look under the trunk section at the bottom to first find the tire.

3).lift up the truck with the jack then get the spare tire underneath.

4).Use the socket wrench to unscrew the bolt's (turn left to loosen turn right to tighten).

5).Take out the bad tire and replace it with the spare.

6).Place the bolts back in place.

7).Lower the car back down .

8).Through the bad tire and your tools back in the trunk.

9).Your all done and can now leave.

(Note - Do not touch the engine or try to operate the car while doing this).

Have you loked in the rear qtr panel they have little door 12x12/ Please rate my response thank you very much