At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Where is the bleeder valve to burp cooling system on...
Ok there is a 2 inch hose coming from the top of radiator follow it to where it connects to the engine it will look like a goose neck it should be right there
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You would vacuum the system then fill with coolant into the vacuum using the same connection as they do at the factory.Any garage will have a cooling system vacuum refill set.
If it has dex-cool in it now then yes add dex-cool to it. So if the antifreeze is orange add dex-cool and if its green add the green antifreeze. It won't hurt it to switch the antifreeze but if you are topping it off, add what is already in it.
where the top radiator hose goes into the top of the engine is where the bleeder is up on top of where the hose goes in. mine is a copper like flathead screw looking thing ! fill the radiator and loosen the bleeder a little and wait for the coolant to start spraying a straight stream of coolant out of the bleeder! hope this helps!
no bleeder ,remove the radiator cap, start car,see if you are cirulatilng good!!
if not replace the waterpump and thermostat!!!
fill system completly up run with the cap off till it reaches operating temp
then make suure the system i s full ,then its burped put the cap back on your done!!!
×