Where is the oil filter on the 2007 saturn vue

Question edited for clarity.
Question moved to model category.

The are a number of types of wrenches, a strap wrench is universal. The messy way is to hammer a screwdriver into it near the bottom end and turn it, but ONLY if it is a metal can disposable filter. The Vue has three engine types.

https://www.google.com/search?q=oil+filter+wrench


..

Andrew Taylor has no clue , it's located in side the fuel take and is part of the fuel pump module . The fuel filter (1) is located in the primary fuel tank module. The paper filter element traps particles in the fuel that may damage the fuel injection system. The filter housing is made to withstand maximum fuel system pressure, exposure to fuel additives, and changes in temperature.

Engine Oil with Filter 2.2L L4 (L61)5.0 quarts
3.5L V6 (L66) 4.5 quarts
Anything else you want to know about your car is in here
http://www.saturn.com/content/dam/saturn/northamerica/usa/nscwebsite/en/Home/Owners/Owner_Resources/Manuals/en/us/2004/vue/2004-saturn-vue-owners-manual.pdf

if you have access to a car ramp the oil plug is located on edge of the oil pan and while under your car you will see the oil filter it all depends on what kind of oil you want sometimes it boils down to budget but remember you get what you pay for

Hi, slide under your Vue forward of the driver-side front tire. You oil filter mounts on the lower side of the engine. It's about the same diameter as a coffee cup--without a handle. Around the bottom of the filter, you should see small dimples. You can remove the filter by turning it counterclockwise by hand. If the filter does not turn by hand, use an oil filter wrench to remove it. Drain the oil completely into a drain pan before you remove your Saturn Vue's oil filter.

Hello and welcome. here is the instructions for removing the trans filter. you will need to drop the bottom trans pan off to gain access to the filter.

Remove the oil pan bolts from only the front and the sides.

Loosen the rear oil pan bolts about 4 turns.

Lightly tap the oil pan with a rubber mallet or pry in order to allow the fluid to drain.

Remove the remaining oil pan bolts.

Remove the oil pan.
Install the oil pan attaching bolts.
Tighten
Tighten the bolts to 12 N·m (106 lb in).

what problem are u having?

if you've never done this before, i wouldn't experiment...instead, find a friendly mechanic that will do the job and allow you to look on as he completes the work :o)
P.S. ALWAYS take your own WALMART oil filter and use MOBIL ONE, I think your car is 5W20 and takes 4 qts. Then only change the filter every 5k-(when you rotate the tires) and at 15k do a complete drain and filter!
Good Luck

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

First which engine do you have? If you have the Ecotec 2.4 4 cylinder you should be able to use a 32 millimeter socket with an extension. Some oil will run off of the filter but should not be real hot. Drain all of the oil from the engine first. Chilton's is a good manuel to use.