Cars & Trucks Logo
Anonymous Posted on Jun 10, 2008

1999 ford explorer ( air bag light)

My air bag light blinks 3 times and then 6. after that it stays on. Can you please help me?

  • 6 more comments 
  • six-of-ten Jul 18, 2008

    I have the same code flashing on my 99 Explorer. It seems that the air bag light has flashed since I bought the car. I brought it to the dealer a couple of years ago, and they said it was a shunt in the wiring harness for the optional side impact air bags. The problem was solved for about two months, then it came back. I really don't want to pay the dealer a hundred dollars every time the damned thing comes on.

  • Anonymous Aug 23, 2012

    Thanks six-of-ten , one other ?, wheren would I locate and seatbelt bruckle,, is it a hard part to obtain, I'm going to remove the buckle and harness to check ? Your info was really great, thanks .

  • Anonymous Mar 12, 2014

    air bag light keeps flashing and sometimes stays on

  • Anonymous Mar 13, 2014

    1994 Nissan ultima air bag light blinking

  • Anonymous Mar 13, 2014

    air bag light blinking 1994 nissan ultima

  • Anonymous Mar 17, 2014

    no lights alarm no working

  • Anonymous Mar 17, 2014

    reset air bag light on 1999 au ford

  • Anonymous Mar 28, 2014

    airbag light flashes 3times then 3times for a while then stays on.

×

2 Answers

six-of-ten

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that gotĀ 5 achievements.

Champion:

An expert who has answered 200 questions.

Governor:

An expert whose answer gotĀ voted for 20 times.

  • Expert 208 Answers
  • Posted on Aug 09, 2008
six-of-ten
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that gotĀ 5 achievements.

Champion:

An expert who has answered 200 questions.

Governor:

An expert whose answer gotĀ voted for 20 times.

Joined: Jul 09, 2008
Answers
208
Questions
1
Helped
98864
Points
312

Since my last post, I found a bright yellow connector under the drivers seat. I took the connector off of the end, bent it a little, and put it back on. My air bag light has stayed off. I am going to put some electrical grease on it and see what happens.

  • jsump286 Jul 29, 2011

    Thanks six-of ten. I took both connectors apart and reattached and the light went out.

×

A

Anonymous

I got a 98 explorer doing the same thing... First it was code 12, replaced the 10 amp fuse, now its flashing code 52... so i gotta find the airbag diag. connector... Have no idea where it is...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Air bag light stays on also alternator and abs 3 lights at the same time, I want how to reset them

what is causing my airbag light, abs light and battery light to ...

https://answers.yahoo.com/question/index?qid...
Jul 12, 2014 - My battery light stays on sometimes it might blink on and off. But the problem is i can be driving my car and my airbag light and abs light will ...

Electrics HELP! Engine management light, Brake, Airbag, ABS, EPS ...

www.civinfo.com > ... > Bugs, faults and irritations
Feb 12, 2012 - 18 posts - ā€Ž5 authors Airbag light. ABS ALSO - the speedometer, rev counter and engine temp ... 30 mins driving (apart from engine management light which stays on). ... I have ruled out problems with the alternator and the relays - they're all fine.

airbag abs srs light diagnose without a scanner air bag ...

? 4:14
www.youtube.com/watch?v=tIBjIr9a42w
Feb 6, 2010 - Uploaded by vehix411 airbag abs srs light diagnose without a scanner air bag ... Alsowhen I tried the scan plugging the paper ...
0helpful
1answer

I have a 99 ford explorer xlt 4.0 SOHC the air bag light comes on when i start it, blinks 3 times pauses blinks 6 times, repeats this cycle 3 times then stays on, anyone have any clue?

it is what they call a clock spring that is going bad u can fix it but its like 200 $ or dill with the light i just delt with the light
1helpful
1answer

I have a code that show on CARMD about the srs light (airbag) on my dash , how do I reset or shut it off without changing an airbag

Hi there:The Restraints Control Module (RCM / located behind right side of the instrument panel) monitors the resistance of the driver side air bag circuit loop and the air bag module igniter at RCM, if the resistance is greater than 3.6 ohms, the RCM will store diagnostic trouble code B1994 and flash lamp fault code.
About the possible causes, pay attention that a high resistance on the driver side air bag circuit can be caused by:
  • - damaged wiring on circuit 1257 (WH/LB).
  • - damaged wiring on circuit 1258 (BN/LB)
  • - damaged driver side air bag module.
  • - damaged RCM.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
0helpful
1answer

How do i get my air bag sensor light to go off in my Ford Explorer Sport. The airbag sensor light stays on constantly, but the airbag has never deployed.

You need to have the system scanned. When the light is on there is something wrong with the air bag system. The air bag will not deploy when the system has a fault. This is something that is dangerous to drive that way because the vehicle is designed for that to go of in a crash, not to have you hit the air bag. If you have the codes retrieved as part of an estimate and post them I will tell you what to do to get the system back on line.
0helpful
1answer

Air bag light blinks 25 times then stays on 2003 for exlplorer

B1996 37 25 Passenger Side Air Bag Circuit Shorted to Battery or Ignition
3helpful
2answers

The airbag indicator light flashes(3-blinks a pause then 2-blinks then repeats the sequence) at engine start then stays on after a minute or so

Code 32 on the airbag diagnostic circuit indicates a drivers side air bag wiring resistance out of range. This could be the connections on the clock spring in the steering or a loose connector to the air bag in the steering wheel. If you are not familure with the proper diagnostic proceedures I do not recomend attempting to repair it yourself. If the air bag circuit is not de-energized before removal there is a possibility of air bag deployment when removing it.
1helpful
1answer

Airbag light flashes 3 times then 6 times then stays on

This is for the driver's side air bag.
This may be due to a high resistance or poor connections in the side air bag (SAB) wiring harness circuits or restraints control module. This condition may occur on vehicles equipped with, or without, side air bags.
Ford has a Technical Service Bulletin out on this no. 03-24-1.
To service, install an overlay harness which incorporates soldered terminals and tin wiring. Refer to the service procedure for direction on which side air bag kit to order. Installation instructions and illustrations are included in the kit.
FOR VEHICLES WITHOUT THE (SAB), FOURTH DIGIT OF VIN IS "Y" OR "Z" :
  1. Install a new Non-SAB wire harness kit 3L2Z-14B455-AB. Refer to the installation instruction sheet included in the kit.
FOR VEHICLES EQUIPPED WITH (SAB), FOURTH DIGIT OF VIN IS "C" OR "D" :
  1. Install the appropriate harnesses as indicated below. Refer to the installation instruction sheet included in the kit.
    • 1999-2001 4DR Limited Explorer XL2Z-14B455-DB
    • 1999-2001 4DR Explorer (except Limited) and Mountaineer XL2Z-14B455-AC
    • 1999-2000 2DR Explorer XL2Z-14B455-BC
    • 2001 2DR Explorer 1L2Z-14B455-AC
0helpful
1answer

Air bag code

I strongly suspect you have a bad connection or corroded connection at one of your connectors.

Here's the LFC (lamp Fault Codes) for 36:

B1993 36 22 Driver Side Air Bag Circuit Shorted to Ground GO to Pinpoint Test V . B1992 36 24 Driver Side Air Bag Circuit Shorted to Battery or Ignition GO to Pinpoint Test W . B1994 36 26 Driver Side Air Bag Circuit Resistance High GO to Pinpoint Test X . B1995 36 28 Driver Side Air Bag Circuit Resistance Low GO to Pinpoint Test Y .


eea36a4.gif
0helpful
1answer

Air bag lite wont turn off in 1999 explorer sport

the light is blinking a fault code at u, but here is the most common cause of the airbag light staying on, it is caused by a break in the flat ribbon rotating contact under the steering wheel, this contact assembly is called the clock-spring contact, u must dis-arm the airbag system and remove the steering wheel to replace it.
2helpful
3answers

Air bag light

my car has a problem of missing when accelerating. It is a kia sportage of 1997. i need help please.

Not finding what you are looking for?

5,250 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...