- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I know this is pretty old, but I've been able to get to my blower motor WITHOUT removing the entire dash. If you take out your glove box and shine a light up above where the air filter is, you can see a round plastic piece with a wire and a little tab on it. Just push the tab, rotate the piece and disconnect the wire. The trick is getting it around your side vent tube, but with a little wiggling not too hard. I live in the country and had to fish 2 hand fulls of insulation out of my blower motor due to mice.8 screws hold the glove box on.
under the glove box,pull out plastic push pin holding plastic duct work and remove duct piece,three screws holding blower motor cover,remove them,then disconnect blower motor wires at connector,remove three screws holding motor up in place. watch the mice don't fall on you!
there are 3-4 bolts that hold motor in on pass side under dash remove this use a vacuum to get what you can if the smell is still there find someone who does complete hvac work they should have a deodorizer that can fix that
You can find instructions for removing heater box in most inexpensive manuals such as haynes. The best way to remove that stuff is by hand, otherwise part of it will always be in there. Also take a good look at wiring harnesses...mice etc like to chew that stuff up and cause all kinds of problems!
Had same problem. Replace Blower Motor. Over a 100 dollars at local parts store, but found online for half price. About 30 minutes to replace. http://www.rockauto.com/catalog/raframecatalog.php?carcode=1431961&parttype=6916 6 screws to remove glove box, One plastic nut on kick panel and 3 screws hold the blower to the air box.
×