At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Having a similar problem with my 01 x5 showing code p1345 that say misfire cylinder 2 fuel cut out but what does that mean ?Having a similar problem with my 01 x5 showing code p1345 that say misfire cylinder 2 fuel cut out but what does that mean ?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi
this could point to either low oil in your gear box, or a faulty speed sensor, if you have a oil leak on the transmission this would come up, but also if the speed sensor also on the transmission is faulty you would get this code..
hope this helps
P0455 = Evap leak monitor large leak detected. This code usually means the gas cap may have been loose or needs the rubber gasket.
P0500 = No vehicle speed sensor signal. Vehicle speed sensor is located on the transmission near one of the axle shafts (it may need replacing).
P0700 = EATX controller DTC present. This simply means you have transmission related codes.
P0732 = Gear ratio error in 2nd gear. This code is of some concern, it means the transmission is slipping in 2nd gear. However the trans may be in limp mode due to the speed sensor code (limp mode means the trans starts out in second gear in order to at least get to a mechanic). The first thing I would do is have these codes cleared as there may be absolutely nothing wrong with the transmission (especially if you pull the trans dip stick and the fluid does not have a burnt smell. The vehicle should drive normally after that. If the check engine light comes back, have the codes scanned ASAP (before any other unrelated code sets). Chances are it may be the output speed sensor if this happens (easy fix). Hope this helps
That normally happens when you enter the wrong code too many times. when you get the wait on the screen, that normally means you need to wait for a certain amout of time with the radio turned on and then it will come up asking for a code, each time you enter the wrong code after this will mean longer and longer wait times.
Hope this helps.
If my answer has helped you, please rayte me on Fixya.
×