My 2001 Landcruiser will not play dvd/cd. It gets stuck. Display of dvd error shows. I purchased a new magazine for it but still the same error message. Any ideas?
Re: My 2001 Landcruiser will not play dvd/cd. It gets
I have the same exact problem:2001 Landcruiser will not play dvd/cd. It gets stuck. Display of dvd error shows. DVD can not eject. Please let me know if you got it to eject. I tried disconnect/connect the battery for full 5 minutes but did not help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi there: When CDERROR shows on the player display, there is a problem with the CD mechanism. It will have to be sent out or taken to a repair shop to have it fixed.
all i can sugest is to disconect the battery to reset the cd player unless it has a reset button i will loke like a very small button that you can only get at with a tooth pick or similar hope this helps ivan
You need to remove the stuck CD...place another (old) CD under the stuck CD...keep tgrying to insert...will eventually kick out the stuck CD...be sure to clean with Disc cleaner to reduce chance of happening again...:)
Okay, I'm assuming that you were sucessful in resetting your radio code.
I'm also assuming that you have a CD player (which may not be the case).
The flashing clock also functions as an error code indicator. It should say something, indicating what the error is. You can't set the clock until the error is resolved (a disc stuck in the CD player, for example, on no disc in the CD when it's been told to play).
The procedure is as follows (which you probably know): The audio system display usually shows the time when the ignition switch is in ACCESSORY (I) or ON (II). It shows the operation mode of the radio, cassette player, or optional CD player/changer when you operate them, then goes back to the time display after five seconds. If an error occurs while operating the optional CD player or changer, the display will keep showing the error code and will not switch to the time display until the error is corrected.You can set the time only when the clock is displayed. To set the hours, press the H (Preset 4) button while pressing the CLOCK (SCAN/RPT) button. Press and hold the H button until the hour advances to the desired time.
To set the minutes, press the M (Preset 5) button while pressing the CLOCK (SCAN/RPT) button. Press and hold the M button until the minutes numbers advance to the desired time.
If you don't have a CD player, or no error is showing in the clock read-out, leave a comment so I can investigate further.
Hope this helps you.
if its factor bad radio is fried same goes with after market radios the only solution with out spending money to find out is to find a good used factore or get new after market your choice
×