How to replace a altenator on a 2003 mazda tribute lx v6

Question edited for clarity.
Question moved to model category.

https://www.google.com/search?q=2003+Mazda+Tribute+V6.+How+do+you+know+which+wire+goes+where+on+coil+pack+plugs

..

Matthew, Vacuum hose diagram should be under hood on a decal/label, on hood it self or on rad cradle usually. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Escape 3 0l V6 Engine Vacuum Leak Testing
Escape City Ford Escape Forums Ford Escape Mercury Mariner Mazda Tribute...
Remove Upper Intake Manifold 2002 Mazda Tribute Part 1 Detaching...
2001 mazda tribute 3 0 LX Detailed vacuum EGR hose routing diagram Google...

Check crankshaft sensor.

The altenator may have went bad again test the altenator and battery again to see that you are in fact charging if not replace and get part free if under warranty good luck hope you get it figured out

even though the altenator tests good, it could still either over or undercharge.The TSB (Technical Service Bulletin) specifies replacing the alternator and re-flashing the PCM.(Powertrain Control Mudule).

chain

Cruise control. Unhook it and see if the problem goes away.

I've owned two Mazda vehicles. An MPV and a Tribute. Both have been great cars. sorry you got a bad copy.

For the 2002 Mazda Tribute 3.0L DOHC V6:
Same for all 3.0L on DX, ES LX, 2WD, 4WD:

Firing Order:
1 - 4 - 2 - 5 - 3 - 6

Cylinders:
........(back)........
|...1.....2.....3...|
.........................
|...4.....5.....6...|
........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

check your engine and battery ground wires and the fuze links.