This is for a 2003 Barina SXI model, 3 door hatch. Do we have to take off the whole bumper to install this please.
Hi, there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins
There is another one one but bitmanual
SOURCE: Remove rear bumper from 2003 Porche Cayenne
removing takes about 5 minute refiting the back bumper will take about an our to refit the rear bumper if your using power tools
the easiest way to do this is tank some white nail polish mark 3 lines on the mounts on both sides this will give you a guide to placen back the bumper to vehicle
SOURCE: The rear hatch on my 2003 Hyundai Santa Fe won't stay up.
Yes. Your Local Auto Parts Store should Carry these as Direct Replacements. If Not, Sears Carries them.
SOURCE: handle on rear hatch door broke off.how can i open hatch door until i can get a new handle?
you don't. take it into a Hyndai Dealership and have the handle repaired/replaced. The rear hatch panel/cover has to be removed (from inside the vehicle) to access the hatch latch and open the door.. from that point the handle can be replaced/repaired.
SOURCE: power locks for rear doors and hatch not unlocking
you have two relays on the interior fuse block one for locking and one for unlocking. Swap them and see if the problem is now such that they will not lock. If so you have your answer.
SOURCE: I want to fit a towbar to my ford focus hatch 2008
Pop the Hatchback open and remove the connectors
from the top of the bumper cover.
Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.
Using Torx Bits, remove the inner rear wheel well
lining.
Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.
Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.
24 views
Usually answered in minutes!
×