- Park the car on a level ground.
- Under the transmission, you will find an 8mm Allen key head bolt on a sheet metal oil pan. This is a drain bolt.
- Place a tray or can under the bolt.
- Unscrew the bolt and take it out. Do not worry, the oil will not drain completely out of it. Inside this hole there is another 6mm plastic Allen key head tube. The complete cvt oil only drains completely if you loosen and take this tube out.
- To add the cvt, there is 22 mm bolt on the middle left side of the transmission. Take this bolt out, add the cvt, if required and tighten it back.
- If the transmission oil is seen coming out of this hole, the level is OK, if not add more oil till it starts coming out through this drain hole.
SOURCE: toyota belta
I am a mechanic in Mandalay, Myanmar. Yesterday only I have done this. I found the fuel filter under the back seat. You have to remove
the big round plastic(white in color). Under this the filter is hanging together with the fuel pump. Take care when reassemble back to position as the big plastic ring would shrink. Go to kitchen and boil it for 8 to 10 minutes in a straight cylinderical shaped bowl so that the big plastic ring won't deform in shape. Press firmly and evenly to place and tighten to place. To be on the safe side remove the battery terminals and put to place after you reinstalled the filter. My advice is to replace with a new one, means to deserve the job. If any problem I welcome you to call me or email me. Tel. 95922127; [email protected].
SOURCE: How much cvt transmission oil quantity required for toyot a belta 1000cc
With transmission Oil Filter 3.1 L
Without Oil Filter 2.9 L
Dry Fill 3.4 L
345 views
Usually answered in minutes!
×