How to remove 2009 Hyundai Sonata automatic shift knob
SOURCE: 2002 VOLVO S60 automatic
I want to change the boot on my 2003 Pasatt..It seems to be connected to the gear shift knob...How do I get the knob off ??
SOURCE: Removal of Radio in 2004 Hyundai Sonata
Remove the facia plate, and remove the 4 screws that hold the radio in place. It's actually one of the simplest cars you can do.
SOURCE: how do I remove the console from a 2007 hyundai
From the factory service manual
1. Remove the screws holding the console side cover and remove the side cover.
2. Remove the screws holding the floor console assembly and then pull out the floor assembly. (looks like a two screws inside the arm console in the diagram)
Here is a link to a factory service manual for your SUV. Hyundai Service Manuals
SOURCE: 2009 Hyundai Sonata-clicking noise at brake pedal,brakes applied
This is not a rich mans car so its normal. Your hearing the solinod that lets you take the car out of park after the brake is depressed so the car can't be put in gear unless the brake is on. If the noise bothers you the soliniod can be found and wrapped in insulation like a rich mans car them you can ride on feeling like a rich man too. ( the Beatles sang that a long time ago) and its still true today.
Testimonial: "Thanks. Dealer hasn't been helpful. I'll see how far I can go before I run out of patiencs."
SOURCE: How do you change the cabin air filter in a 2009 Hyundai Sonata?
I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.
814 views
Usually answered in minutes!
×