2005 kia sedona multimeter readouts for crankshaft pos sensor

SOURCE: where is the crank position sensor located in 2005

Hello martinezmelm: My name is Roger and I can answer your question. To locate the crankshaft position sensor. You will need to remove the timing cover. You will find the sensor on top of the crankshaft gear. Between the V of the timing belt.
Should you need further help please just ask. Please rate the answer as this way I know it was helpful. Thank You for using Fix Ya. Roger

SOURCE: where i can find vehicle speed sensor for kia sedona 2002

It is mounted on the tail end of the transmission. It has two wires coming out of it typically.

Testimonial: "thank you for help full"

SOURCE: Where is the input speed sensor on KIA sedona 2005

on transmission has 2 wires at right side of trans .by axel

SOURCE: 2005 Kia Sedona, Trouble Code P0320. Everything I

This is a common problem usually related to the crankshaft position sensor. Before you replace it, disconnect the electrical connector to the CPS sensor and clean it with electrical contact spray and add a dab of dielectrical grease. If the problem continues, replace the CPS sensor. It is easy to replace and is not very expensive. It just bolts to the engine block with one or two bolts. I believe the CPS sensor on the Sedona is behind the timing cover on the front of the engine.

SOURCE: Crankshaft position sensor replacement on 2005 Kia Sedona

The CPS is located under the timming cover 4 small bolts remove the cover and the sensor is viewable 2 bolts have to be loosend and the wire leads up to a dual connector on the left side of the engine