1998 Plymouth Voyager Logo

Related Topics:

A
Allan Posted on Mar 24, 2018

1998 Plymouth voyager blend door location - 1998 Plymouth Voyager

5 Related Answers

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Apr 11, 2009

SOURCE: 1998 plymouth grand voyager cruise control relay/fuse location?

Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.

Ad
motor1258

Mike Butler

  • 6674 Answers
  • Posted on Sep 08, 2009

SOURCE: where's the crankshaft position sensor located in 98 plymouth voy

Guessing it's a 6 cyl, 3.0L, but should be located on transaxle housing above vehicle speed sensor.c937fe4.jpg

Anonymous

  • 1985 Answers
  • Posted on Dec 06, 2009

SOURCE: replace blower motor 1998 plymouth voyager

it is located behind and below the glove box,you might want to remove the glove box assembly to see it easier,
there are four screws holding a blower motor cover you to take off first,now remove the screws holding the blower motor up,disconnect the motor wires.
if your changing this because you think its bad,you should test the blower motor wires with a test light with the key on and blower switch turned on.if you have power in the wires,then it is bad.
but if you have no power in wires it could be blower motor resister,or switch.

Anonymous

  • 1206 Answers
  • Posted on Jan 06, 2010

SOURCE: Where is hatch sensor for 1998 Plymouth grand voyager (3.3 FLEX)?

its built into the lock mechanism lock might have to be replaced try adjusting it first. should be able to move the latch.

Testimonial: "A true expert. Makes sense to me."

DNO36

Dean Stewart

  • 49 Answers
  • Posted on Dec 28, 2011

SOURCE: Where is the fuse for Cigarette Lighter in 1998 Plymouth Voyager?

The lighter/outlets fuse in under the hood, on the drivers side fender.

The lighter fuse should be the 4th little one in from the driver. It is a 20A/yellow colored fuse.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1999 Plymouth Voyager 4 cylinder. Where is the camshaft sensor located on it please?

Question edited for clarity.

The year is whatever is in the registration document or on the sticker in the door frame.

Help and videos

https://www.google.com/search?q=1999+Plymouth+Voyager+4+cylinder.+Where+is+the+camshaft+sensor

..
0helpful
1answer
0helpful
1answer

Heater and cooling

your blend door is not working this a door that switches it to other spots on your heater this is located in the heater box
0helpful
1answer

98 voyager dinger comes on at random sometimes stays on

Do you mean door ajar dinger? If so you must remove the door pamel and replace the switch that is located on the door latch inside the door.
0helpful
1answer

I have a 98 ply grand voyager, and have heat from the drivers side vents, but cold air from the passenger side vents? please help

Does your van have seperate controls for driver and passenger temperature settings? If so the most likely cause is a broken actuator or broken passenger blend door. Unfortunately, the only way to repair a broken blend door is to remove the dash and the HVAC assembly.
0helpful
1answer

Heater not working

This sounds like the blend door actuator. This is a little door in the vent box down under the passenger side dash that opens and closes to change the vent temperature from heat to a/c. It is a little motor that opens the door. It tends to stop working due to the elements that it is in. I hope this helps!! Thanks!!
3helpful
1answer

Where is hatch sensor for 1998 Plymouth grand voyager (3.3 FLEX)?

its built into the lock mechanism lock might have to be replaced try adjusting it first. should be able to move the latch.
0helpful
1answer

Heater / air stays cold when moving temp control.

possible blend air door stuck,or heater control assembly faulty
9helpful
2answers

Where's the crankshaft position sensor located in 98 plymouth voy

Guessing it's a 6 cyl, 3.0L, but should be located on transaxle housing above vehicle speed sensor.c937fe4.jpg
2helpful
1answer

1998 plymouth grand voyager cruise control relay/fuse location?

Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.
Not finding what you are looking for?

573 views

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...