Go to start black screen ??? Need more info from you . What screen goes black . What light's up ? The instrument panel ? Do the headlamps light ? Do they go dim or out when trying to start the vehicle ? Is the battery good an have good cable connections .
SOURCE: 1988 delta 88 wont start
It sounds like your iginition switch is faulty. Could be time for a new switch
SOURCE: I have a 2003 town and country wich wont start,
check the starter again by banging on it with a hammer it could be defective starter if not check your crank shaft position sensor
SOURCE: My 2006 Cadillac STS won
most of the time it occurs after replacing a battery but if this occurred out of the blue then something like the transponder has failed
you'll need a professional scan tool and about an hour to diagnose the concern
then when fixed, you'll need another 30 minutes to reprogram the computers and keys
SOURCE: the car won"t crank, 1992 Volkswagon Passat
If the switch (neutral safety switch) is broken, it will not crank regardless whether you jump the battery or a new battery is installed. I don't have specific manual for your year that's why my advice is as in general. With a remote starter tool, bypassing the solenoid wire with remote starter which is connected to the positive terminal of the battery of it's other end. Once positive current flows from the battery, through the remote switch, flowing towards the solenoid, the starter should engage indicating a bad wiring harness connection from ignition switch. If it doesn't crank at all you may have a bad starter assembly and needs replacing. If your starter is clicking using it's own battery power, your battery is low of charge or your charging system is malfunctioning.
Pls, rate this suggestion, thank you.
SOURCE: 2002 Impala 3.8 will not
You need to check and see if the security light is on or flashing.If it is then the security system is what is keeping the vehicle from starting.You need to get the codes from the Theft Deterrent module and from there it will need to be diagnosed to find the problem.The Theft Deterrent module and the PCM is what allow power to the starter once it sees that the correct key has been used.If you have a worn out key this could cause it not to work.So if you have a second key you can try that first.If the light is not on or flashing then you have to check the crank fuse on the left side of the instrument panel.Let me know what you find out.I`ll be glad to help you out with any codes and tell you what they are.Good luck.
458 views
Usually answered in minutes!
×