SOURCE: unlock radio for a 1996 monta carlo?
hi friend,
Your car has a anti theft radio in it . What has happened is at one time some one entered a code into the radio. What you are going to need to do is stop at your GM dealer and have them unlock the radio. The charge will be approx 30$ (that's what my dealer charges) Make sure you specify that you want the old code removed. Also ask them for the four digit backup code they get when they call GM. They will press numbers 2 and 3 on your radio and get digits then they will press am fm button and get two more digits and with those digits they will call a 1-800 number that only GM can call and they will get the unlock code. Sorry but I cannot divulge the number. Big TROUBLE!!! Hope I have helped
UNLOCK Code is:
1761
Ignition ON
Hold Minutes for first numbers
Hold Hours for last numbers
Press AM/FM Button
Turn ON Radio
hope this helps u
please rate me.................
thank u for using fixya
regards
sivaranjini
SOURCE: How do i program a keyless entry for a monta carlo
1. Turn the ignition to ACC or ON and the radio to off. Do not crank the engine.
2. Press and hold the DISP button on the radio for at least five seconds until settings is displayed.
3. Press the SEEK up or down arrows until FOB PROG appears on the display.
4. Press the PREV or NEXT button to enter the submenu. The current selection will have an
asterisk next to it. BEGIN will be displayed.
5. Press the DISP button to start programming. When the message PUSH FOB flashes, press and
hold the LOCK and UNLOCK buttons on the first transmitter at the same time for 15 seconds. A
chime will be heard to verify the transmitter is learned.
6. Repeat Step 5 for each additional transmitter up to four remotes total. You do not need to press
the DISP button again, just press down the LOCK and UNLOCK buttons on the next transmitter
to be learned to a maximum of four transmitters per vehicle.
The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.
EXIT (Exit Feature Customization Mode): This feature allows you to exit the vehicle customization programming.
To Exit:
1. Scroll until EXIT appears on the display.
2. Press the DISP button to exit programming. A chime will he heard to verify the exit.
SOURCE: need serpentine belt and supercharger
Hello rnsherry7185,
Below are two images, one showing both belts. The supercharger is the belt to the front.
The second image shows the accessory belt.
I hope this helps.
Regards,
netvan
Please see my tip at http://www.fixya.com/cars/r6235876-no_heat_fan_blowing_cold_air . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.
182 views
Usually answered in minutes!
×